1915

FlatheadTed

Well-known member
Heres a early dash board ?1915 were the later ones wider to fit the cowl ,and is there a metal bit that goes on the inside ,Also is there a special puller to pull the rear hubs with a thred on it .
 

Attachments

  • 01Jan2005_2634.jpg
    01Jan2005_2634.jpg
    76.6 KB · Views: 46
Last edited:
It doesn't exactly match any of the drawings in Lang's catalogue, but the one for 1915-1916 seems to come closest.

And yes, there is a threaded wheel puller. It's pricy, but all the parts dealers sell it. You can sometimes find one at a swap meet, but you have to be careful because they come in sizes other than Model T.
 

Attachments

  • IMG_2862 copy.jpg
    IMG_2862 copy.jpg
    47.9 KB · Views: 7
Last edited:
i have a later firewall and it is a few inches wider. Like, nearly 4 inches wider according to pictures found on the internet.
 

Attachments

  • 202445.jpg
    202445.jpg
    41.6 KB · Views: 16
  • 202443.jpg
    202443.jpg
    69.4 KB · Views: 14
Last edited:
I'm not sure I understand your question but here is what a '15-'16 firewall looks like with the hood former on it. '17 to '22 would be similar dimensions without the hood former. Wider firewalls would be metal and '23 to '25. Hope this helps.
 

Attachments

  • frwl.jpg
    frwl.jpg
    48.8 KB · Views: 25
Back
Top