I would like to know what color the three hole front seat brackets are supposed to be painted. I also need to know the distance between the three hole seat brackets. I am going to have to make the front seat hinge tube that the long rod slides through, so I will need the distance between the three hole seat brackets. Thanks in advance for any help.
180a owners
- Thread starter waspaugh
- Start date
peters180a/170b
Well-known member
"ALL" Metal seat parts are [SEAT BROWN] what color i used is in the paint guide.As far as "ALL the mounting seat parts Chris Lindquist in C.A. 1-408-295-8813 MADE those parts. Snyder's sells them and also Bratton's. The rods we use are radiator support rods [repro] .WE cut them to size and,,, the swing arm nuts are for enclosed car windshield .If you need measurements i'll do it this weekend sometime[maybe Saturday morning ] and get back to ya. If i am lucky i'll find my touch up can of paint for the front seats and see is the formula is still readable .
Ken Ehrenhofer
Well-known member
If you need a formula for seat iron tan I can give it to you,
let me know,
Ken
let me know,
Ken
peters180a/170b
Well-known member
See if mine matches Kens? CMS 2490A ,,,, SC01- 44.80 ,,SC10 -115.60 ,,,SC25- 242.20,,,SC65-350.00,,,SC77-498.40,,,,SC90-520.90 .....I have distance between the 2 floor bracket are 16" the tub,, where the rod goes thru.The flat steel piece spot welded to the tub is 13''3/8 and 1-1/2 " wide with 3 holes in it. LOOK AT VERN post under- Model A' Victoria seats {POST} ! Perfect picture of the setup for both 180A and 190a....