160B Slant Window Windshield

[Glenn C.]

Would someone happen to know the correct screw size and particulars for the two top, right and left screws of the windshied frame. They look like they would have to be, slotted, oval head, but what thread size etc. ?

Thanks for the info !!

 

[MAG]

10/32 x 1/4"

 

[pat in Santa Cruz]

The two front screws are the ones with the oval head and nuts. The four side screws are flat headed. Any A supplier probably has them.

 

[Kevin in NJ]

As I recall they are the same for all strAight and slant.

The screws are different from hardware store?
I think the counter sink taper on the screw head does not go all the way to the shaft. It only goes about half way as the thickness of the sheet metal would cause the taper the bottom before the head seats. Of course I could be remembering wrong.