12v Optima battery

T

terry

Senior Member
Will one of these fit into the under floor battery location for my 36 Ford? Thinking about just
setting it on its side and just using some sorta bungee cord to keep it in place. terry
 
You’ll have to modify your battery holder. No bid deal, it’s been done before for 6v optima’s, just a more radical mod for the 12v.
 
terry said:
Will one of these fit into the under floor battery location for my 36 Ford? Thinking about just
setting it on its side and just using some sorta bungee cord to keep it in place. terry
Click to expand...

I'd installed one of these in a friend's '36. It fit in the original tray at a nearly 45° angle.
I used a 1" wide tie strap to secure it. A rubber cord will allow it to bounce, something I'd rather not allow with a battery.
 
I'm kinda off the Optima's. Started using the small thin Odyssey's. They work in any position but upside down. Lots of cranking power. The one I'm using is a PC 1100.
 
Krylon32 said:
I'm kinda off the Optima's. Started using the small thin Odyssey's. They work in any position but upside down. Lots of cranking power. The one I'm using is a PC 1100.
Click to expand...
Odyssey-PC1100-Battery.jpg

Description

Voltage: 12
Length (in): 9.8
Width (in): 3.8
Height (in): 8.1
Terminals: M6 STUD
 
Thanks for the help fellas. I am wondering how price of the Odyssey compares to
the Optima. Just noticed the Optimas are made in Mexico. There must be the hidden
teriff cost on them.
 
With a little shopping I found the PC1100 for $325 with free 3 day shipping. You do need to purchase a pair of their screw on terminal adapters about $20 bucks. More than an Optima but the one under the seat of my deuce pickup is 6 years old. May die tomorrow? One other thing, mine said made in the USA!
 
You must log in or register to reply here.
Back
Top