Search results

I have a 226 flathead in a 52 ford f2. I tried converting it to 12 volt and was unable to find an alternator that would charge the up the battery because the engine rpms are to low for it to charge the battery unless I was driving 35-50 mph. I was never able to find what size pulley to use to...

Looking for a bed for a 1951-52 ford f2-3 long bed, previous owner thought it best to fill the cracks and voids in the bed with concrete. The bed sides are now almost completely cut in half all around the perimeter. Body shop informs me it is not worth fixing..... Any help appreciated.

Hi I have a 1952 ford f2 6cyl 226 it is wired 6 volt. I have all new wiring and gauges. I just installed a new temp sending unit and hooked everything up. I did not use teflon tape when I installed the sending unit, it should be getting a good ground. When I turned the ignition on the temp...

Thank you for your info. I am very great full.

Yes the cover is metal when I took the cover off there was a wire that may be touching the case when it is installed. It is extending from the solder joint beyond the side of the relay. I will clip the wire and give it a go. Thank you

Took the cover off and checked everything. All the connections are solid nothing broken or burned into , it does have a burnt smell to it and there is a discoloration in the coil part it appears a darker color than the rest

Could it be a bad bulb? I switched from 12 to 6 volt and did not have this when using 12 volt.

Yes Sir As you have shown is how it is wired up.

Thanks I have all new tail lights and wiring, everything is new any suggestions on checking ground?

Thanks fellas, One wire comes from the horn to the relay left side center is power and the right goes to the switch through the steering column. Disconnected the wire going to the horn button (through column) and it continued to blow. Sounds like a bad relay. Side note the relay makes a very...

Hi everyone Just finished putting all new wiring in my 51 Ford f2. Its 6 volt and I followed the instructions completely. I am wondering why when I push on the brake pedal that instrument cluster gauge light turns on and then off when I let off the brake pedal.....Any thoughts? Thanks

Hi This is my first time on this forum. Okay here is what I have a 6 volt flat head 226 all new wiring harness new horn switch and horn relay. When the battery is connected the horn runs continually. Any help is appreciated