Search results

Thanks FortyNiner. I clicked on the site you posted, now have it saved, and was able to read Mark Kicsak's article. Plan to get back at it again tomorrow.

Thanks for the offer Woodie. Graeme has emailed them to me and hopefully tomorrow when my office opens we can enlarge them.

I checked v/8 times and flash drive but can not locate the 09 may june issue. Is there a way?

Thanks guys. Will try 51 merc's suggestion and attempt to enlarge Graeme's article which appears very detailed.

I am looking for tips. The closest I have been able to get mine is a 1/2" gap. Have new hinges and support arms. I am aiming for a 1/8" gap but would be happy with a 1/4". All suggestions will be much appreciated.

I believe the wire goes to the horn ring.

Yes I am referring to a pair of new carbs. Are the Carpenter carbs worth the money?

Thanks Charlie and Sal. I am going to keep an open eye for pair of NOS. Will not give Macs $800. for a pair.

Hoping someone can tell me which valve is correct for my Ford 94 carb and what the other 2 are for.

I had a local glass man install mine in my 48. Rubber goes in first using glass cleaner as a lubricant. He did not use a cord on the windshield but did on the rear window wrapped around the rubber twice. For the windshield he used a plastic spreader to fit the glass into the rubber grove. The...

Very interesting guys. I have an Eldebrock Super 2 carb intake for my 48. Was wondering about the choke and throttle cable hook up. Am I right in assuming the throttle cable also goes to one carb only? For the pedal I intend to order a dual carb linkage rod, 3-1/2" long from Macs if can not buy...

In the 50's I replaced my flathead with an Olds Rocket 98. 6 volts had trouble turning it over. I added a second 6 volt which I connected between the solenoid and the starter. Every week or so I had to relocate the batteries as only one was being charged. I came up with a system using a solenoid...

Stenny: I think you are correct. I forgot about Monarchs as they have been gone for years. My merc will have a Monarch ring which will be a topic of conversation.

I have a horn ring the PO purchased for a 48 Merc which I am trying to identify as the insert is not listed in my catalog. Hope someone can tell me what I have. Photos attached.

email me at fjzielski@yahoo.com or call Frank at 613-9698363

Thanks 199Fordy. Those instructions tell me where the L's go.

Have a kit from C&G for my 48. Kit consists of 5 packages. Front seal instructions show it glued to door from top of hinge down. Top seal show it glued to the body. No instructions where included for the back or bottom edges or the little L pieces. I have e-mailed C&G and am waiting for a reply...

Googled Shoebox and could not find quarter window springs. Bought a 2" spring from Home Depot and connected it to the comma with a rod and it seems to work.

Thanks for the reply. Never heard of Shoebox Central but will google them.

Would very much appreciate someone telling me what the springs that keep the window open look like and how stiff are they as mine are missing. I suspect they resemble brake shoe springs but not as stiff.