Search results

Re: Please help with Timing on Model A w/B Distrib....problems!! Your wire from the coil should be solid wire not the carbon centered wire used to day it may spark but not good enough. Gord. B by the Bay

The route with the least problems will be cross from Detroit Mich drive along the Blue water Highway (just a nice country drive in Canada for i hour then return back to the USA from Sarnia to Port Huron on the twin Blue water Bridges. No jams no traffic a nice country no hills all paved...

I have used 2-1/2 pulleys on both my A's alternator and system works fine Gord. B by the Bay

They weremade in canada under the name "WILSON there also a supplier in Florida Gord. B by the Bay

On the ****** I disliked to have to crawl under the car to check the level, I cut a 3" square hole in the floor board just above the plug wich is 3/4" pipe thread remove the plug and screw in a 3/4 by 5" nipple with the a 3/4" pipe cap on hand tight. go to a autowrecker and get a dip stick that...

Ray let me know if you received message on the puller Many Thanks Gord. B byh the bay

Hi Ray I sent you a message you should havew it I will check and redo Sorry Gord. B by the Bay

Time to try "GORD'S EASY Head Puller 100% history of removing Heads. Gord, B by the Bay

Yes here is the location, Jon Miller Yorkton VA 757-898-4144 he has parts and very helpfull Gord. B by the Bay

In Canada you cannot get an ownership with a plate with out in inspection and one it em is shocks Gord, B

I have had similiar damage and when the head was removed we found no clipring that holds the wrist pin was missing on the one end, when pan was removed the remains of the clipring was yet to be found it must have went out thru the muffler, we resleeved the cylinder wall and back on the road...

I have used the float from a Tillitson X carb works well and put a bend in the wire to keep float of the bottom of the tank mine was installed about 20 years ago no problem yet Grod B by the Bay

Is that a Ron kelly Balancer? if it is I have one on my B engine for 50,000 performance is very smooth works well for me Gord, B by the Bay

Peter time to try a "Gord's easy Head Puller" 100% history of head removal Made in Canada Try one Have a Great Day Gord. B by the Bay gbaverstsock@bmts.com

Walmart in Canada sells the Optima Batteries good price also Gord. B by the Bay

Try "Gord's Easy Head Puller" made only in one piece with a 100% history removal. Gord/ B

tHE ABOVE suggestions are all good and there are many possibilities alond with the gas Cap not venting, make sure the wire from the coil to the dist. HAS A SOLID WIRE nof the cardon center jobs that are used on the cars today. Give it a try and drive for miles Gord. B by the Bay

Water is the way to go no engine fumes easy to maintain Gord B by the Bay

I am 83 with 2 A's had my first A at 18 still driving and going strong Gord B by the Bay

Test your float in boiling water on the stove it will show you were the leaks is cold water does not help Good luck Gord B by the Bay