Search results

  1. Lefthander1930

    Moving bench seat

    Looking to move my bench seat back for more leg room, 30 coupe. Best way or method ? I guess I'm the have to cut shorting the package panel. relocating the seat on the adjusters back and drilling new mounting holes. Looking for some in good input. Thanks
  2. Lefthander1930

    Vintage Car Parts Swap Meet Redlands, CA 5/10/25 Event Coverage

    What the best way easy or hard to move the seat back about 2 to 3 inches ? Need more leg room.
  3. Lefthander1930

    Water pump question

    How do I tell the difference between the stock water pump and the leakless type ?
  4. Lefthander1930

    Generator ground terminal

    The wire burned up from the ground terminal to the reg. Wire was mounted to the mounting screw on reg. Just happen while driving ? Why ?
  5. Lefthander1930

    Broken wire

    I broke one of the wires to the ignition switch. It just happen to be the one with the vinyl wrap, wound in steel. It took a while to get the wrap off, Then I manage to unwind the cable and strip the cloth off. Put a terminal on and then put back the dash panel. It starts And runs. That was my...
  6. Lefthander1930

    Wonder what they're saying

    two blue fan
  7. Lefthander1930

    Windshield glass

    I have a crack on the inside of my windshield. The little bonnet is welded on the body over the windshield. With that said, Can I get the glass out and back in without removing the bonnet ?
  8. Lefthander1930

    Haven't been on here

    Take care of you self, Remember most of us are in the 4th Quarter.
  9. Lefthander1930

    Starter problem

    Old and new return spring was weak. the spring BETWEEN THE FLOOR BOARD AND THE ROD CONNECTED TO THE ROD KEEPS IT FROM STICKING TO THE STARTER SWICCH !
  10. Lefthander1930

    Starter problem

    Starter problem cured. I did the spring thing between the firewall and the starter rod. Try it three times it works. Can't wait for the next issue to come up !! HAHa.
  11. Lefthander1930

    Starter problem

    starter did turn the engine over while cranking.
  12. Lefthander1930

    Starter problem

    When I tried to start the motor, The starter motor keep running. I got a new starter switch installed it and tried it again same thing. Must be something in the starter ??
  13. Lefthander1930

    Vin number location

    Where would I find the Vin number On my 30 Coupe ? Motor and frame My Vin starts With. SFA on the pink. I thought most started with the letter A follow with numbers.
  14. Lefthander1930

    Steering box/column

    I have to much play in my steering box. 30 coupe Don't know if its a 9. or 2 tooth. Question is, Anyone or place that's in the Sacramento area That's rebuilds Them ?
  15. Lefthander1930

    LED bulbs

    I think I have aftermarket taillights. The top taillight has two wires in it. the bottom has one for the running lights. Why does the upper have two. I thought I only needed two wires, One for the running lights and the other for brake and stop.I'm thinking the upper has two for the brake and...
  16. Lefthander1930

    sun visor

    Any ideas for a sun visor on the drivers side on my coupe ?
  17. Lefthander1930

    Turn signals

    I'm installing aftermarket turn signals Mounted the turn switch and made sure it was grounded. Installed the two fronts that mount between the bumper rails. they both work good. Now should I incorporate the rears into the factory wiring or add two rears like the diagram shows ??
  18. Lefthander1930

    ignition question

    I recently removed my amp meter, removed the wires made a new wire across the two posts. Starts now and runs. I now notice that I get voltage on both sides of the coil when not running and the key off. Was it that way before ? I was just wondering about the points burning up or am I missing...
  19. Lefthander1930

    Radiator flush

    Is there a good radiator flush that I can do at home ?
  20. Lefthander1930

    ignition switch

    The previous owner install a switch for electric temp gauge to turn off when not in use. Is there a place/spot where I can hookup a wire that will work only when the key is on ?
Back
Top