Search results

The metal tab inside the drivers side door post that hold the dovetail in place on my 160-C is bent down & to the inside of the post, if I remove the lower wood tack strip on the post will it give me excess to the tabs?

I work on the North American Eagle www.landspeed.com

Tom you were right-on the wire from the switch to dist. was touching the gas tank THANKS ALL PS: we sent the witch doctor home

He is running 6V

Hot coil Update He said he was check things today and his fuse holder was hot but the fuse was OK. I think he needs a witch doctor

A-12000

Went to lunch with a friend yesterday on the way back his car started missing, backfiring and died about four times he was able to restart and get it home, checking things out he found that the coil was so hot he could touch it for only a few seconds (in the past two years he has had four coils...

I need to fix the steering in my 31 SW but not sure what length steering shaft I have the way things got swapped around in the past, but I am trying to keep it on the road as long as possible, would someone please tell me what length horn rod goes with what length steering shaft.

I need a new part number for a condenser, I have used NAPA # EP-30 for years but the new condenser has a pig-tail that is about one inch to short, so what are you 12V guys using and it need not be a NAPA part

My engine has always leaked oil out the radius ball socket but lately it is getting bad, I check the crank end play it is .015 is this enough to pump oil out the rear main & if it is how good is the bronze thrust washer ? Thanks in advance John