Search results

Thanks guys Ron Walker

I was at a show and someone asked me if I was sure that my windshield wipers were on the correct way. The more I thought about it I really wasn't sure. I started looking a pictures of 1940 Fords and then large majority had the wipers facing outward, and I thought that was the way they went...

Thanks BruceMO i removed the fiber washers and cleaned them.I am going to order a new diaphragm just in case Rwalker

Great idea v8fordman , I'LL give it a try.Thanks

Thanks Seth Swoboda, I think that the pump I have is Made by AC Delco. I was wondering if Ford used pumps made by AC in 1940 late builds

Thanks very much for the information Terry,OH that is what I needed to know. \Rwalker

thanks for the reply Seth R Walker

The original fuel pump on my 1940 85hp outlet valve was sticking after sitting for a while.I decided to rebuild it. The valves in it are not like what rebuild kits show. The valves are like fiber washers with little springs holding them in place. This pump has the staggerd inlet/outlet ports,has...

Are you able to set a code on the remote control on a warn winch like a garage door opener or do they come already set? If one remote works all it would be bad loading your car next to someone with the same winch. Rwalker

Would anyone have a picture of the correct way that the headliner and side panel are done at the "B" pillar on a 1940 Ford Standard Tudor? Looking for points judging on restoration. Thanks very much Rwalker

Had the same problem when I restored my 40,generator would not charge. Took gen. and regulator to generator shop and it all checked out fine. I had painted the gen. They told me to remove all the paint from where the gen. grounds to mount. Solved problem,been working fine ever since. Might want...

Paper clips work great. Rwalker

Falling into first while car is rolling means the input shaft of transmission is turning the same speed as output through rotating of drive shaft. You have a clutch problem,whether it be bearing, disk, pressure plate,or clutch linkage as slowforty states,check these before sending transmission...

I agree with Ken/Alabama,The problem you are having is in the pilot bearing. I have run into this many times. The bearing is allowing the input shaft to turn when clutch is disengaged. The sync. are keeping the gears from grinding going from first to second and second to third. The bearing...

Thanks 19fordy, I got in touch with Wayne Moore and he said that the 40 Ford Standard tudors that he done they done in leather. He is a lot of fun to talk with. Super nice guy.\ I tried to get in touch with the other two authors but could not find their numbers. Thanks again Rwalker

Thanks TonyM I have the Early Ford 1940 book and the samples that LeBarron sent me for the 1939-40 closed cars looks nothing like whats in the book. I just wanted to make sure that what LeBarron Bonney re-sends me is correct. I am trying to have car ready for the National AACA show in Charlotte...

Thanks John Worden for the pictures. From the looks of your car the side panels are plain and the seats have stripes. Thanks again Rwalker

Thanks Steve and 19Fordy, I have been told by LeBarron Bonney that the seats in a 1940 Ford Standard tudor use the same material.That it has stripes in it. \ \I have been told by people that know a lot about 40's that there were no strips on panels. \And I thought that someone may have a...

Hello, Does anyone have any pictures of the headliner on a 1940 Ford standard tudor,particularly around the B-pillar. Does the door panels have material the same as the seats? I am wanting car to be point judged,and not wanting interior to cause a point deduction. Even the interior suppliers are...

thanks for the information and quick reply,the chevy nuts sound like the way to go. I knew y'all would have the answer Thanks again ron