Search results

Thank you so much. As you can tell wiring is not my strong suit. Now to get her done.

What gauge of wire is used on the #86 pin and #87 pin. Last question !!

So the power wire goes to the switch first ?

Where does the power wire hook up to ?

So a person would run a wire from the battery with a inline fuse to the relay then to the heater switch ?

Thanks for the reply Petehoovie. Hopefully I can make that work.

What would be a good relay to use ?

While on the subject, how much oil is enough ?

Thanks, I'll give it a go.

Thank you so much FortyNiner for the reply. Now I know what it looks like, could I make this piece out of cork or rubber to save time ? Moe

Could someone tell/show me what is needed to make this horn work properly ? Any help is greatly appreciated.

FortyNiner, Are you saying there is insulating material that attaches on the screw that the wire terminal attaches to ?

Took my horn ring off to feed a new horn wire and when I put the horn ring back on, the horn keeps beeping. What am I am missing ?

My 47 is 6volt positive ground system. So I hook one cable from the positive post (ground) to the switch and one cable from the switch to ground ( firewall) Is that the right way.

Hi tubman, thanks for advice on the 6volt. So one cable from the negitive post of the battery to the switch and one cable to ground on the firewall, but I have a positive ground system, I'm confused please set me straight.

I want to install a battery disconnect switch on my 47 car. 1. does it matter if it states 6-48 volt or 12-48 volt, will both work on 47 6volt system ? 2. what is the proper way to hook it up to a 6 volt positive ground system 3. what size cable should i use ? Thanks

I just changed mine both ****** and diffy , I used a squid can worked fine

Yes, if you make another one for me so I would have a set.

I guess a person could use them for many set-ups. I learn something every day.

Thanks for the reply, I guess he's right !!! I'll go ahead put them in.