Search results
-
T
Query: what do you call this tool? I need one
Hello I struggled with those special screws on the top of the trico motors . Tried small vise grips needle nose pliers. worked OK untill you get to the ones close to the raised part of the casting. recently I was frustrated after trying unsuccesfully to get these out. I took an old junk...- true blue 32 man
- Post #11
- Forum: Early V8 (1932-53)
-
T
1932 Ford seat
Hellu What we have here is a 1932 fordor seat assembly. The stamped curving back wraps around and forms the sides and the slightly arched top are 4door. The 5w have seperate side stampings (metal) that are spot welded to the botom and are basically flat . 3w sides are made of plywood. Both 3w...- true blue 32 man
- Post #6
- Forum: Early V8
-
T
Column Lock and Steering Box ID 32-34??
I agree with Fred A The 32-33-34 big trucks (BB) used the same column drops as the 32 passenger. However the column tube was a thicker wall tubing. The (BB) steering box was similar in appearance but was larger and very few components will interchange with the 32 pass boxes. The 33-34 large...- true blue 32 man
- Post #5
- Forum: Early V8 (1932-53)
-
T
32 Column Drop Disassembly
Hello If your original came out why do you need a replacment? These pins are special and were knurled on end that went into the inner shaft. If yours is not reusable you could use a split spring steel pin commonly known as a roll pin. They're available in many sizes. You should be able to pick...- true blue 32 man
- Post #14
- Forum: Early V8 (1932-53)
-
T
1932 Ford Trunk Lid Handle
Hello First off let me say that in nearly 50 years of fooling with 32 Fords I have NEVER seen Genuine #@ Ford Door or Trunk/rumble handles that were not made with ALL STainless outer pcs(4) outer clad , back clad,tube, and bezel. Starting in 1933 the outer clad was still stainless, But some of...- true blue 32 man
- Post #5
- Forum: Early V8 (1932-53)
-
T
Hard Steering 34 pick up
Hello I have just completed an upgrade to my 32 box. The needle sector kit from Snyders is PN A-3674 for $19.00 Sector seal is A3549-A for $4.oo Have yet to purchase an upper bearing for the upper tube.(aprox $7.oo at my local bearing supply house. I disasembled my 32 bos and took it to...- true blue 32 man
- Post #30
- Forum: Early V8 (1932-53)