Search results

Any hood from a '26 or '27 Model T will work - they are all the same!

btt

btt

Would like to get a Riley cast iron Flat Head in good unmolested condition for Model A. Will purchase or have Winfield Carbs and parts for trade. If you know someone that has one of these heads they're not using, please send them my direction. Thanks

Benson thank you for the link

This is my first impression: It is a floor board draft deflector from a Model T Ford. They get bent up from not keeping the bands up and the pedal hits the sheet metal. The one pictured by Chris is in nice condition. Maybe the early Model A's had one too?

Chris I sent you a pm since I was unable to put a photo up of a 40-50"s 6v pump.

Chaffin's Garage, Corona CA; great parts at best price and fast courteous service.

Re: ^•^ Happy Birthday Kim Dobbins ^•^ Best Birthday Regards Kim! Geary Baese & Wayne Leonard

DB parts, such as front axles and steering columns can be found on Model T's up through 1913 and some are said to have appeared in early '14.

I have used sealing wax, which is still available instead of tar on many coils.

Here are two Model M-B's with the choke horns they came with. At first they were thought to be cut down silencer horns, but the silencer horns were to short to cut down and end up with these. One like this appeared on the auction site also. A very nice article on the Winfield Model M is in SOS...

stevests, Thank you for the correction. Never saw a 39 before.

If the rear is jacked up with both wheels in the air, the action of the differential can throw the test off, sometimes one wheel will spin in the opposite direction, depending on the drag within the differential. Only jack one wheel up, repeat the test and compare the result. The pinion is the...

The Ruxtell axle is a two speed rear axle. The standard Model T ring gear has 40 teeth with an 11 tooth pinion. This would give a lower low, a standard low, a lower high and a standard high. Great for hilly runs, especially in a heavy sedan. While the ring gear remained 40 teeth, a 9, 10, 12 and...

Bert's has the tool for $18.50 and they ship fast.

The FL-1A works fine as do the other manufacturers equivalents. I like the Wix that is shorter than the FL's since I have a 90 degree adapter on the original purchased from Bill Kenz adapter I have. There threads about it on here somewhere... Best regards, gb

The batteries were like that example or similar. Four of those for six volts was enough to fire off the ignition and then switch over to mag, although a good mag works just fine. My '11 never carried batteries and the ones in my '13 rarely got used. The batteries were often kept under the back...

Re: Brass model “T”s That '11 Touring is sure a dandy car!

The tools in the 1906 through 1909 parts books don't show a logo, although the Ford logo on the radiators of the 1906-08 Models N, R & S, all had a script that was supposed to imitate Henry's actual signature. Known as the "winged" script, it continued until sometime in 1910. The block...