Search results

I believe I got it from Summitt Racing, free shipping.. Part # 82001, https://www.summitracing.com/parts/pwm-82001

I have a Power-GEN alternator. Been running it for 9 years now, no issues. As far as the ballast resistor, you will need that only if you are still running the 6v coil.

Yes, longer one for Victoria and Deluxe Phaeton.

Agreed, that's what we did. Main problem is if you don't keep the retainer EXACTLY centered when releasing the spring compressor, it will knock off one of the keepers. You can't exactly see what you are doing with the engine in the car. Engine out of the car and on an engine stand is another...

The only issue I have with the modern valves is installing the keepers when the engine is installed. Original keepers are much easier to install. Granted, not something you do very often (hopefully never). I bring this up because recently a member's car stuck a valve and we had to remove it...

I also noticed "Reaction Score" and "Points", haha. Very cool site, Ryan. Thanks

Here is the thread I think you were referring to. That was 11 years ago. https://www.fordbarn.com/threads/carburetor-13-32-deep-well-socket.160740/ Haag hasn't beed on Ford Barn since 2017.

Yep!

I think f-1 sector shafts are splined.

Model A has a square shaft, not tapered or round. Not sure how well around shaft would work? As suggested, a picture would help.

Can't say I have ever seen one like that so I will be the first of the 75% to say to go back to original points.

Isn't a Harley carb a side draft, not an up draft? If so, you will have to fab an adaptor/elbow. i once saw a Pinto that had Honda 4 cylinder carburetors. Looked cool with 4 CV carbs.

Right below the Ford Barn banner, black stripe, User CP (Control Panel) on the left,

Thanks Ryan for all that you do.

https://www.fordbarn.com/forum/showthread.php?t=360647 See post 32 and 33.

I heard they are made by Bratton's. Bratton's just quit selling retail but still supplies parts.

??? You stated "red to negative and black to positive" which I was referring to and is incorrect.

Red should go to Positive and Black to Negative. If you have original Positive Ground, this should be correct. If you have negative Ground, this connection is reversed.