Search results

test

I have used a strip of rag wrapped around behind the handle. You pull back on one end sharply. It should catch the tip of the clip and pull it out

Good to see you are about to be road ready again. Your build was one of the first I found in the 52-59 group when I first became a member. I was inspired by your built.

I noticed when I attempted to attach a picture my file was too large. What is the size limit? Thanks for retaining the 52-59 group.

Nice. Thanks Ryan.

Thanks guys, now if I can remember what I did, maybe I'll be able to get the pictures in my cooling post to show.

Nice

I have decided that I need to upgrade my radiator. The new one is from Champion and is for a 54 Customline. I ordered it from Jegs with free shipping. In my case modifications to the car will be necessary.

While I had the radiator out I wanted to address a slow water leak that I couldn't pin point. I pulled the water pump and the timing cover to replace the gaskets. I found this area on the timing cover by the yellow mark and chose to replace it. I also replaced the harmonic balancer. When I...

I welded two 2x2x1/4 pieces into the knoches to beef it back up.

Jeff, I always appreciate your input. My car was a v8. That radiator looks to be close to the Champion 5456 I have. I have cut and removed enough from the valance to move my a/c condenser and radiator forward enough to use my mechanical fan. I'm working on modifying the bracket that...

This is the finished bracket, it will get paint. This has been removed near the white mark, but leaving the forward hole for location of the bracket above. This bracket has also moved forward.

I know I'm slow to update but I have to relearn how to post my pictures each time. I have the radiator and condenser mounted and plumbed back in. The hood latch support and latches are painted and back in. I still need to pull a vacuum on the a/c and recharge it. I get back to that after I find...

Are the pictures showing in this post?

Do the pictures show now, if not maybe I'll need to repost them.

Hey Guys, My wife and I along with our daughter and son-in-law took off last week on a camping trip. No tents involved. I'm just getting back to my picture issue. About posting pictures, I'm not sure if I can explain why the pictures in my cooling post showed up. As far as explaining how to...

@ Ajracing9, I don't know if you noticed in the picture where I had to remove some of the splash shield to be able to move the condenser and radiator back. When I originally installed the ac, I had to remove some of the splash shield to be able to install the condenser. I didn't do anything to...

These are the last details that enhanced the cooling along with the larger radiator. This gap between the condenser and the radiator need to be blocked to improve the air flow through the radiator. Y'all may have been aware of this but I didn't realize how much it improved the air flow. I...

Picture didn't take, back to the drawing board.

That's on the wrong side of the Country.