Search results

1946 Super Deluxe I need some help figuring out how to attach the retractor springs. The car didn’t have a brake spring when I bought it, so nothing to go on there. The clutch spring was in place and I have replaced it as I found it, but it doesn’t retract the clutch arm when I push it down -...

46 Super Deluxe Trying to install rear hubs and I’m having trouble getting it to slide far enough over the axle to get the seal, washer and nut on to tighten it down. I’m assuming the problem is the key sitting too high - at least toward the inside where the taper is - meaning that I set the...

1946 Super Deluxe I’m trying to figure out if the rubber backed engine/transmission support assembly should be bolted down to the frame bracket with the pan head bolts that hold the saddle (?) to the bracket OR should it just rest on top of it. When i took it apart (see photo), it was just...

I’m wondering if the bar I have is bent. I know there’s a curved section towards one end, but there’s another indent on the other end that doesn’t seem right. Anybody know what to look for here? I’m attaching some pictures and I hope they show what I’m talking about. Also, I’ve been searching...

I've been searching for KR Wilson BV-121tool to replace my shackle studs (I have NOS studs), but no luck so far. So, I'm thinking about modifying a C clamp with the guides that can be fabricated. Short of having the KR Wilson tool, is there any other way to press the studs in without smashing...

Getting ready to re-assemble the pinion gear assembly and want to know if I should pack the three bearings with grease or just a little gear oil (140W) beforehand. I know the bearings will be lubricated by the oil in the differential housing, but wasn't sure if greasing them was a bad idea...

I'm working on a 1946 Ford Super Deluxe station wagon (woodie) that has metal wrapped leaf springs. Each spring has two zerks embedded in the wrap. The zerks are mounted in a special cage nut that has a flange that holds it in the metal wrap. I have 3 of the 4 cage nuts, but need a fourth...