Search results

Gentlemen, Looking for a Steel Oil Pan and/or Drain Plug for a 1941-42 4 cylinder truck engine. This is the stamped steel pan not the cast iron pan. Drain plug part number is 91A-6730. Thank you for any help or leads. Brad

Trying to source a repro steering wheel. Tried the usual with no success. D-Carpenter, B-Drake. Mac Ford Site is impossible to navigate! Appreciate any thoughts and help.

Gentlemen, I have 2 (NOS) Coil Resistor Circuit Breaker assemblies for my 41 truck. Both came in boxes labeled 01A-12250. However looking thru the perforated metal cover over the circuit breaker portion there appears to be an obvious difference. One has a few turns of heavy gauge copper wire...

Looking for the Extension that is approximately 24" long. I have been told it could be an early PU?? This extension has the 1/2" square on the crank handle end and the two cast "ears" on the crank shaft nut end. The lug nut end of the handle is for the 3/4" lug nut. Appreciate any help.

Looking for the "toothed" sector of the emergency hand brake handle. OR the complete handle assembly for a truck. Parts book identifies it as # B-2795 and/or B-2795-B. This is the part the bolts to the transmission and has the ratchet teeth to hold the brake handle in position when engaging...

Help Please, Working on a 1941 4 cylinder. My Parts Manual calls for a LOCK NUT # 355823 S7 to lock the stationary point in position after setting the point gap. Can someone help with the nut size and threads per inch. THANKS!

This voltage regulator is said to be an OE for Ford 6 volt Positive ground "B" circuit operation. Approximately 1941 vintage. I've never seen one stamped like this, although the color coding appears to be correct for the wiring harness. I would like to verify if in fact FORD OR aftermarket...

Gentlemen, Looking for 1 or 2 Pedal Return Springs. Number 11A-7523. Parts manual says it's 7.3" long. This fits a variety of years and applications. Thanks for Help.

I am looking for a NOS or good take out 50 psi oil pressure sender unit. Part number 48-9278. Working on a 4 cylinder truck motor and book calls for the 50 psi unit. Thanks for help and leads.

Looking for a 1936 OR 37 Horn button/switch assembly. Does not have to be V-8 embossed. Prefer black. Do not need the shaft below the plate. Thanks

Greetings, Looking for a 1936 OR 37 horn button/switch/plate. Does not have to be V-8 imprinted. Prefer black. Do not need the rod below the plate. Push button must work/function. Thanks.

Guys, I need one or two engine oil fill tubes as used on the early standard V-8. It measures about 5 1/2" sticking out of the block. It is straight pipe, has no bend, and OD is about 1 3/8", and does have the internal baffle. Nice used, NOS or repro would work. Thanks for any help or...

From a 41 truck with the L-4 engine. Includes shifter, adapter and rear output yoke. Also have an extra; adapter ring, between L-4 engine and transmission, and intake/exhaust manifold. I will be at HERSHEY in the Orange field and can deliver. Thanks.

I'm looking for a 1941 Ford truck 4 cylinder engine oil DIP STICK. Please HELP. Thanks, Brad

Gents, My parts book calls for a starter switch, push button style, number..... 11 AS 11500. Can you help with color of bezel and push button please? And is the bezel stamped "START"? Application is 1941 Ford Comercial. Thanks very much.

Wanted, Need the 01Y-5463 Stud-Bushing used in trucks. Body measures 1" OD x 2" long. Overall length is 3 7/8". phone 717-846-1963 or email at bgates8848@aol.com Thanks very much, Brad

Gentlemen, I need a fuel pump for the 4 cylinder engine in my '41 pick-up. It's the flat head, L-4 engine. Can be a core needing rebuilt. All help or leads appreciated. Thanks.

I'm looking for the horn button, chrome retainer ring and the brass contact under the spring for a '36 or '37. Do not need the rod or plate. Basically, just the "guts". Thanks, Brad

I see from previous posts that Bill is dealing with some serious health issues. Anyone local to him that can check on some shocks he rebuilt for me. E-mails and phone calls are un-answered. Thanks for any updates, suggestions and help.