Search results

Can original passenger car rear mounts be used between a passenger car frame and AA bell / fly. housing ?

Regarding the oil galley end curved oil line, some are brass, some are steel. Would a firm but not super firm fit be OK? In other words, can the line be easily inserted without resistance ?

Need an excellent condition oil pan with no leak drain hole, etc. Prefer west, left coast only. PM please

Should a washer be used under the castle nut when installing the repro aluminum fan ? Nothing in the instructions about a washer.

Which oil Filter is best for the side mounted valve cover design ? Should the filter have internal pressure and bypass valves ?

Have a set of stock 16" x 4.5 wires with 5 x 5 1/2 bolt spacing. Can these be adapted to 2010 Ford ranger disk hubs with a 3.75 back space (15 x7 wheels) ? I found spacing adapters for the bolt patterns but not sure what size would fit and that would allow clearance for the disk brake calipers...

What vendor can replace the odometer numbers on a Waltham round speedo?

Does a Marvel Carb need (or is there a method) to be air balanced for an air filter ? Also, should a drip hole be provided in the air throat bottom ?

Wanted: Older alum. oil filter rt. angle adapter Ford M-6880-A50 90 previously sold by vendors, to fit full flow side valve cover.. The new blue ones (B50) have metric fittings and don't fit 3/4-16 threaded filters. Tried junk yards to no avail. Pm please.

Is there a special spacer surrounding the wiper shaft that passes thru the wood header, and if so, does the wiper compress on the interior fabric header panel or somehow on the spacer to prevent the wiper from rotating ?

What color were the masonite side panels in the deluxe deliveries? This is not mentioned in the De Angeles, Henry, Francis book.

Wanted,a decent gas gauge for the '30-31 tanks, round speedo. Pm please

Need a pint or qt. of thorne brown acrylic lacquer for touch up. Any leftovers from another project will suffice. Please pm.

cancel post

Lost my cap for the large filler breather 4 cylinder pipe. Please respond to pm asap if available. Many thanks.

Need the thread size for the in-tank hole and the fuel line connection end. Thanks

Without engaging in the pros/cons of a Pinto engine in an A, would a Mitchell overdrive be a preferred option than a Mitchell Synchro transmission to accommodate the engine's higher rev's ?

Wanted winterfront to fit 1931 radiator and later shell with painted inserts. Prefer one with cable adjustable louvers. PM please.

Need only 1 yd of cotton or wool taupe/ tan broadcloth (side panels or headliner) to cover '31 interior sun visors. Existing material has a slight pinkish hue compared to that in kits offered by today's vendors. PM and I can send a small sample. btt

Any suggestions, other than the glass lipped mounting rubber sold by the vendors, to provide an outer seal between the glass and outer skin ? We'd like to not remove all 6 pieces of glass to install new mounting, originality aside.