Search results

Guys what is the actual thread size on a 1948 ford f1? Is it 1/2-20 or? Thanks. Luke

Guys what is the compressed and uncompressed length of the rear shocks on a 48 f1 truck? I want to order some but not 100% sure. Was going to order Monroe 32207 but want to make sure first. Thanks. Luke

Just starting to mentally work my way thru a future project. Starting with a bone stock 28 model A frame and thinking of engine ideas. Im not even sure if it would fit very good but is there much to a straight 6 flatty for performance improvements without breaking the bank? Already have an 8ba...

My exhaust manifolds on my 8Ba are cracked and in bad shape. Are they known for breaking upon removal or do I have a chance at getting these out with minimal problems? Anyone have a suggestion? Thanks. Luke

Im hoping this is an easy question, I have a 48 pickup with the 8ba, looking to do the t5 ****** swap, found one on craigslist from a 91 s10, the guy said it is a 5 sp manual ****** from a 4cyl truck and that there is no tag on the ****** so I cant check the code. Anyone know if the 4 cyl trucks...

I know that the options are endless, but does anyone have any advise on what they have found to work on these 302's as a fairly straight forward option for better performance heads. Right now they are stock for a 68, thought about bumping up to the 351 Windsor but after a little research there...

Hey guys I'm planning on installing Speedways lowering springs this spring onto my 1950 ford f1. From what I've read it is smart to install new spring shackles at the same time. Is there any other modifications that I need to be aware of before I get started or is it pretty much a bolt on thing...

Its a 48 ford f1 with stock suspension. Putting on new rims and tires, changing to 15"rims. I think 235 75 R15 should work good on the back with an 8" wide rim. Front rim will be a 15x7 anyone have any thoughts on a size for the front? Or any suggestions for what you guys have found to look...

So I have a bone stock model A chassis, pretty sure 1928. Im wondering who has started with this type of chassis and turned it into a rod and what kind of stance to expect. I do want to box the frame and get rid of the rear spring cover brace and go with a standard type coil over rearend...

Hey guys does anyone know how to go about putting a little smaller steering wheel on my truck? I know how to go about it but wondering what the size or spline would be for this truck so I can start looking on evil bay for a decent new or used one. I know why they had them so dang bug but even an...

Finally finishing up the truck, all new brakes were done so we took it around the block which totals about a mile and pulled in the driveway and you couldn't even touch the radiator. My mustang would never be THAT hot in such a short period. Timing is right on. Only thing I can think of is do I...

Did a 48 ford f1 have ground straps from the engine to the frame and from the body to the frame? Just finishing up my project of 6 - 12 volt, changed to negative ground, no more points, carb rebuilt, all brakes are new, new wiring harness, added tach, all fluids changed etc. And when the truck...

Does anyone know if the small brake line clips on a 49 ford f1 are a universal fit? I looked both in LMC and Dennis Carpenter and couldn't find a number to order them. Hoping I can just go to bumper to bumper and get a universal. Any help would be appreciated. Hoping to work on tonight. Thanks. Luke

Anyone know what the weight of one of these trucks is? short bed with a flattie v8.

Guys what is the stock tire size for a 49 f1 pickup? Not looking for width mostly need a overall tire height. Thanks. Luke

My 48 ford f1 has some stump pulling gears in the rear end. Stock as far as I know. Truck has a 3 speed manual and at 35 mph it is spinning about 3000rpm. I was hoping to get the truck up and running so I could take to work a couple days a week but I don't see how I could ever think of going...

Guys my 48 f1 has a 3 sp manual in it. What is the process of changing out the fluid on this thing? Does it have a drain plug or do I have a pan to pull off or? Also my guess is this takes grease not MTF fluid? Thanks guys. Im a total rookie on these years vehicles.

What were the stock front wheel and tire sizes for a 48 f1 pickup? Also does anyone know what backspacing will work for a 15" wheel setup with bone stock front suspension and brakes? Going to be putting new rims and tires on and want something that will be a nice fit. Thanks. Luke

Do all 48 f1's have a coil mounted to the top of the leaf springs for added suspension? My front end sits higher than the rear and I got looking at it and it seems that there is a coil spring rigged in a weird way under each side of the front end. I would think if it would be a ridability thing...

Extremely solid Georgia car, was a 289 car with factory AC. Floor boards are solid as a rock. Car needs a left front fender and to be put back together. Moved and don't have room to store it anymore. Black vynol top is perfect. This would be an easy restoration for someone. Price is negotiable...