Search results

I am looking for a black and white picture or outline of a 1928 Closed Cab Pickup. Can anyone point me in the right direction. Thanks. Don/WI

The Nickle A Region of MARC had our annual Corn Roast today. On the trip home one of our members had the misfortune of breaking the clutch release bracket located on the lower shaft that passes thru the bell housing. i volunteered to help with removing the broken part and installing a new (or...

I replaced the cam in my rebuilt engine with a Stipe cam. Now I have a chance to sell the original cam. What would be a fair price? Thanks. Don/WI

What is the width of a 1930 Town Sedan? I am thinking of buying a Premium Portable Building and the width of the door opening is 70". Probably not much clearance if any. Thanks for any feedback.

What is the diameter and pitch for the distributor shaft screw? It does not seem to be anything standard. Thanks for any response. Don/WI

Why do they use the AA on the engine number of 1 ton trucks when the engines are all the same? Don/WI

I recently attempted to machine a manifold assembly. I mounted the assembly using the carburetor mounting to fasten it to an angle plate on my milling machine. In doing so I noticed that the manifold mounting surface is not perpendicular to the carburetor surface. I measure approximately 0.024"...

Years ago I bought a KRW Combination Machine with some tools but not all that should be with it. Along with that stuff I have a KRW V-40 part that I believe is an engine adapter and it has a large shaft with threads on the end to probably fasten it to a stand. Does anyone know what it might be...

I have the opportunity to purchase a K.R.Wilson Combination Machine complete with all of the babbitt pouring equipment, boring equipment, etc. I have checked it against the information in the "K.R.Wilson Service Station Equipment for Ford Dealers 1931 - 32 Catalog" (reproduction) and the "Parts...

Is anyone going to the swap meet at the Washington County Fairgrounds this Sunday, February 22? It is sponsored by the Wisconsin Chapter MAFCA. Here is a link to their advertising flyer. http://media.americantorque.com/photos/2014/10/31/2015_Swap_Meet_Flyer.pdf It is usually a great meet and is...

Can anyone give me the dimensional differences (diameters) for the tapered area of the A drive shaft compared to the AA drive shaft. Also, what is the included angle of the tapers of each. I am assuming at this time that the taper angle is the same on both. Any help would be appreciated. Thanks...

Last night I was in my easy-chair watching TV and cruising the FordBarn web-site on my tablet. A couple of us are planning to install seat-belts in our Fordors this winter and so I decided to use the search feature using "seat belts". I was able to enter the title "seat belts" in the normal...

Does anyone know if it is required to have seat belts installed in our Model A's if we go to Canada for the 2015 MARC National Meet? Thanks for any response. Don/WI

This past week-end, the Nickle "A" Region car club toured to Hill & Valley Days at Cross Plains, Wisconsin. Had a great time except for one incident. Two of our members have 1931 Slant Window Fordor Model A's. One of the members could not open his door after unlocking it. He took the handle off...

Does anyone know if there will be patches available for International Model A Day which is September 27th this year? Is Bruce Adams going to head this up again? What will be the price? Is there a minimum order? Our Model A meeting is tonight and I am starting a list for our members that would...

I recently bought a set of Model A king pins. They were not in an original box, but they are new and all the normal parts were included. However, in addition to those parts, there is a set of king pins with the bushings. These king pins are just straight shafts, with a machined area for the...

A fellow Model "A"er is looking to repair or replace his front axle. He brought his old axle to me and asked me for my opinion on repairing it. One of the kingpin holes is worn and the kingpin moves side to side about 0.030". He asked if I thought it could be drilled/bored out and a...

I need some help locating a source for "Member Buttons" for our club. We have had these buttons available for many years for members to put their Names in and wear them at events to help get other people to know their names and identify them as club members. These buttons are oval or football...

Our Model "A" Club, Nickle "A" Region - MARC/MAFCA, has factory badges left from the MARC National Meet in Oshkosh (2012). We also have some left from the 2002 Meet that was held in Green Bay. We are selling them for $5.00 each plus shipping. The cost with shipping is as follows: Badges...

I have a flywheel dowel retaining plate the came from an August 1928 engine that I disassembled last spring. I never saw one like this, even in my July 1928 CCPU engine. The pictures show an "extruded boss" which contains a felt washer. This engine didn't have the transmission with it. Has...