Search results

Drake 36 repop hood ornament with the blue Ford insert, attached is an original aftermarket lazy V8 accessory that will fit the 35 & 36 ornaments. the Lazy one has been rechromed. the Drake unit is only slightly used and presents as new. The Drake unit is in Atlanta and the lazy part is in...

Can anyone tell me if a 35/6 car windshield will fit a 35/6 pickup? Thnx!

Can any of you Barners tell me the dimensions of the shaft of the actuator mech that moves the rear window up and down? I want to put a small crank handle on mine, to replace the little wing type handle. My car lives up in Maine and I only get to visit when the weather is nice. It's 1200 miles...

Does any aftermarket company make a gauge set that will fit the openings on a 36 dash? My speedo works well enough, but the temp/oil/amp and ESPECIALLY the fuel gauge are unreliable. I have some mini gauges in my glove box but I would prefer to view these from the designed original position and...

Dole Valve Mfg Co aftermarket closed car wind wings New chrome, new glass, all attaching hardware, glass setting tape (S/S screws etc.) included. These will fit 35-39 closed cars. I checked fitment at the EV8 meet in Franklin TN, so I'm sure about that, they may possibly fit 33-34. pm me for...

Fulton Mfg aftermarket wings old chrome over brass mounts in nice shape, this set includes attachment hardware (S/S screws, etc) that I was able to scare up. new glass $400 I know they will fit 35-39. I checked at the EV8 meet in Franklin TN . may fit earlier years, I should have checked them as...

I have a pristine complete NOS luggage rack with NEW chrome mounting brackets that have never been bolted up. all clips for the perfect stainless are there. I had it powder coated black back when I was having some other parts done. It was rust free and no pits present. The V8 emblem has a stud...

I have a pristine NOS luggage rack complete with NEW chrome mounting brackets that have never been bolted up. all clips for the perfect stainless are there. I had it powder coated black back when I was having some other parts done. It was rust free and no pits present. The V8 emblem has a stud...

I need a 36 spare tire cover lock retainer clip. The clip holds the lock cylinder into the piece that keeps the faceplate from being removed for access to the 3 bolts that hold the tire on. I've tried a snap ring but it interferes with the spring action that pushes that locking plate off the big...

Are there any providers who sell a new 36 tank with the proper stock style fuel line hookup, gauge hole and filler neck opening? Bonus points for stainless steel! Double bonus points for proper fit!!!

Does anyone offer a bolt on rear Panhard bar kit for a 36? I'm running a 36 Columbia with a Posie reverse eye rear spring. About to put some longer shackles on. Not too keen on welding anything on if I can help it.

Im installing a french block motor with a delco dizzy. 8BA timing cover. I had a 1/4-20 bolt tapped into the shaft housing for a hold down. this isn't gonna do it. There is a flat on the head adjacent but no hole for any sort of attachment device. This metal the block is made of is pretty stout...

I got the 41 motor with the hole in the water jacket out of my 36 coupe, and in its place sits a fresh built french block motor with wide belt truck water pumps. The earlier motor had a delco style alternator bracket but it doesnt put the alt pulley far enough forward to align with the crank and...

Does anyone make a bracket that allows a beehive oil filter to mount up to the 8BA head? Using the stock tapped holes in the head.

I'm swapping out my 41 motor to a fresh built french block motor. The original temp gauge fitting is firmly stuck in the old head and attempts at removal have resulted in rounding off the flats on the fitting. Even vise grips won't budge the thing. I'm assuming I'll need to cut the wire that...

While I am waiting on motor repair stuff I thought I would install a Posie reverse eye spring I've had lying around for a while. After getting the old spring loose I began to tackle the shackle (rhyming too!) in the axle side. It isn't like any I've ever seen before. Period aftermarket I...

For some time now I have been watching a weeping spot on my 41 motor. It is located about 1 1/2" above the pan rail and below the rear exhaust outlet on the drivers side. It has been getting progressively worse. Last week I took a small pick and scratched at it a bit. It immediately caved in and...

I anyone offering LED tail light inserts for a 36? I don't want or need the housing, trim or lens. I would prefer white LEDs instead of red, so my blue dots are blue and the license plate illumination is white. I'm 12v as well.

I don't know about you guys, but I've been thorough a number of fuel gauge senders that were "supposed" to work correctly but didn't. At this point I'm willing to look at anything that can be regarded as reliable and the appearance be damned. I can hide the gauge face somewhere and even if its...

I took the wife out on a little ride on Christmas day. Pretty day and no traffic to spoil it. However the smell of the crankcase blow by was pretty annoying to her and a bit to me as well. Any suggestions on reduction of this unpleasantness? I'm currently running a 39 motor with a stock 2 bbl...