Search results

How do you remove the door garnish molding on a 1940 Ford coupe? Do you have to remove the vent window first?

Getting ready to install a Bob Drake one piece trunk gasket on a 40 coupe. Any tips on the installation, doesn't look like the easiest to install without making a mess with the rubber adhesive. Thanks in advance for any help or suggestions.

Converting my 40 Ford to 12 volt and looking for a battery with the same dimensions as a 6 volt so I can use the stock battery tray and hold down. Napa store couldn't come up with a match. Any ideas? Thanks.

Running a 39 Ford toploader ****** in my 40 coupe, also using 39 pedals but they need new bushings. I cannot find them in any of the catalogs anyone have any ideas? Thanks for the help.

Looking for some help on 6 volt to 12 volt conversion on 1940 Ford with flathead V8. I am going to use the stock wiring harness as it is fairly new, have converted to 12 volt generator and starter along with regulator, coil, voltage drops for gauges, bulbs etc. Question is what do I do with the...

Quick question is there a gasket that goes between the rear transmission mount and the transmission on a 1940 Ford? Thanks.

Adding a dual master cylinder with adapter to my 40 Ford with stock drum brakes. Need to add 10lb. residual valve in the line. My question is I am keeping the stock 1/4" brake lines but can't seem to find valves made for that size line only for 3/16 lines. Does anyone make them or will I have to...

Just pulled the transmission, clutch and flywheel from my 40 Ford and found this. The clutch and pressure plate are 9" but I am wondering if this the correct flywheel for the car. Never saw one with the deep dish like this one. Should I look for a flat flywheel or just have this one resurfaced...

Finally got around to pulling the motor and ****** out of my 40 Ford coupe so I can repaint firewall and inner fender wells and also repaint motor. While the engine is out I figured it would be a good time to see what shape the clutch was in. The car has a 59AB flathead with a 39 floor shift...

Does anyone know if you can mount a 40 Ford trunk handle on a 39 Ford trunk lid? The car I bought is painted and the trunk handle was removed and filled, I wanted to put the stock 40 handle back on but found out it is a 39 trunk lid. Thanks.

Does anyone know if replacement emergency brake tubes for 1940 Ford backing plates are available?

Looking for a handbrake equalizer clevis for my 40 Ford. This is the that goes on the end emergency brake cable and hooks to the cable equalizer under the car. Thanks for all the replies found one tonight.

I am in the process of installing window glass in the doors of my 38 coupe, have the fuzzies installed on the door and the garnish molding and the larger end track pieces installed but there is a roll of felt and 25 window felt fastener clips included with the kit and I have no idea where they...

Looking for stainless steel side trim for a 1938 Ford Deluxe Coupe. Thanks.

Looking for a 3 speed column shifted transmission for my 1951 F-1 pickup. I would prefer one that is ready to drop in and use not looking for one to rebuild. Thanks.

Can anyone tell me how many header bows there are in a 1938 Ford Deluxe coupe. I bought a set of six which were supposedly from the same year car but I am having trouble installing them. Not sure exactly which bow goes where, front and back bows went in fine but having trouble placing the rest...