Search results

Looking for an Aristocrat accessory gauge panel for the round-speedometer Model A. Best contact is email jea777(at)centurylink.net Substitute @ for (at). The things we have to do to foil the robo-scammers.

Great for a rat rod or "driver" stock model A Ford. Rebuilt from original springs, so leaves are correct contour. Lubricated with cup grease & Teflon tape between all leaves. Any worn areas where leaves contact were blended for free motion. Measurements with spring off axle & standing on floor...

Two 1928-1929 Model A Ford 7-tooth steering boxes & shaft tube assemblies. Complete except for sector gears. Shafts have good steering wheel splines & threads. Worm gears appear to be good. One shaft turns very freely; the other turns, but is stiff. One 1/4-28 threaded hole at side cover is...

Rear spring - 9 leaf Great for a rat rod or "driver" stock model A Ford. Rebuilt from original springs, so leaves are correct contour. Lubricated with cup grease & Teflon tape between all leaves. Any worn areas where leaves contact were blended for free motion. Measurements with spring off axle...

Distributor was bead blasted & painted black, then rebuilt with new upper & lower shafts, weight springs, bushings, best B-style cam, modern Motorcraft points & condenser and special concave spring unique to the B distributor. Also, new dowel pin which engages the head. Assembly was checked &...

Distributor was bead blasted & painted black, then rebuilt with new upper & lower shafts, weight springs, bushings, best B-style cam, modern Motorcraft points & condenser and special concave spring unique to the B distributor. Also, new dowel pin which engages the head. Assembly was checked &...

I would like to find a driver's-side locking scroll door handle for the Model A Ford. The stem is longer than most and tapped for attaching the inside handle. The bezel is flat where it meets the body. A very few of these were used on Ford commercial vehicles in 1931.

3-piece U-joint housing. Upper & lower housing mating faces ground flat for better sealing & bolting. Sealing felts installed. Ready to run. New pair cluster & idler shafts. Throw-out bearing hub (used). Rear bearing retainer A-7085-A. Blasted, painted, w/ grease fitting. All for $45 +...

Looking for Cling's E-brake kit P/N 2004. It is for early Ford juice brakes on a Model A. Consists of special brackets, cables & connectors to hook cables to original cross shaft.

I am looking for a locking scroll driver's side handle. See the photo of the passenger side handle I have. The stem is 3 5/8" long from the bottom of the flat eschuteon. The end of the stem has a drilled & tapped hole. An exact match is not necessary as long as it has the opposite curl. I can...

I am looking for a locking scroll handle for the driver's side. Also looking for window crank handles with counterbore for a screw attaching it to the end of the mechanism stem.

Front spring - 10 leaf Rebuilt from original springs, so leaves are correct contour. Lubricated with cup grease & Teflon tape between all leaves. Any worn areas where leaves contact were blended for free motion. Measurements with spring off axle & standing on floor: 5 5/8 floor-to-bottom of...

Can someone tell me if the 255A window handle was common to any other vehicles? Ideally, I would like to find original handles (2). A picture would help a lot for swap meet hunting. Thanks much- James

I would like to find a L/R pair of locking scroll door handles. The stem is longer than most and tapped for attaching the inside handle. The bezel is flat where it meets the body. Parts or leads are appreciated. To use my home email, substitute @ for (at) to foil the spam bots. Thanks, James...

Does anyone know of parts or info on the window riser mechanism and metal cover plate used on the 1930s woodies? I know that the Model A and maybe Model B woodies used curtains, and the 1937 had glass roll-up windows. I do not know what year Henry started using glass. Do they interchange with...

Does anyone know of parts or info on the window riser mechanism and metal cover plate used on the 255A ? Do they interchange with any other bodies? I would like to purchase a pair of assemblies.

Front spring - 10 leaf Rebuilt from original springs, so leaves are correct contour. Lubricated with cup grease & Teflon tape between all leaves. Any worn areas where leaves contact were blended for free motion. Measurements with spring off axle & standing on floor: 5 5/8 floor-to-bottom of...

81A-7105 Synchro hub w/good 81A-7069-B thrust washer 48-7518 Inspection cover (Blasted & painted black) ??-7231 First/Reverse shifter fork (Fits 81A7222 housing) 81A-7240 Shifter shaft – 1st/Rev. 81A-7241 Shifter shaft – 2nd/High 74-7238 Shifter detent ball, spring, plug (2 sets plus bullet)...

Rebuilt original. Good straight rod. Painted black. Has 1/8" NPT grease fitting holes with modern style fittings. Picture available. $65 plus shipping. Please contact thru jea777@centurylink.net for quickest reply.

Excellent original straight bare rod (no internal parts). Good end plug & grease fitting threads (1/8" NPT). Removed from 1934 PU. Not sure what other years it fits. $50 plus actual cost shipping. Picture available. Please use jea777@centurylink.net for quickest contact & reply.