Search results

Hi y'all , Here we have a nice fordoor body only, new floors welded in, rust free doors, very solid and straight overall. Includes spare wheel , mount, cover and locking cap. Also includes a complete cartouche interior kit, seat covers, padding, door cards , headliner..everything! In camel...

Hi all, I'm looking for a pair of rear axle bells from a 32, condition of races not important ,doing a push in axle conversion, I'm using the ends only to build a Columbia to fit my 32 truck. Also need a 39 right hand bell to shorten another Columbia for a good friend. This one would need a good...

I have a very solid 35 fordoor sedan body for sale, its an amatuer restoration, in primer, most bodywork is done and it is pretty straight . has had floors repaired, they need a little grinding and finishing. here is what is included. -bodyshell with all doors hung and latching nicely -deck lid...

Hi there, as the title says, wanting to find some high compression 99AS 'Denver' heads, left and right. (they will have 6049 and 6050 on them.) This is for my '39 Merc motor, which is currently wearing 81T heads..and suffering pretty low compression for it! I understand they are pretty hard to...

Hello, Im in the process of registering a 1933 Ford 1/2 ton pick up in Australia, and need to know the actual rated load carrying capacity figure to complete the paperwork is it actually 1/2 a US Ton? does this include passengers or just the tray capacity? would be great if someone could give...

Hello all, I have a 46 sedan delivery in the shop, and Ive not fixed a horn button on one before, so Im not sure what is supposed to be there, and havent had much luck finding a diagram of the parts involved. What I have.. -stock steering wheel. -the centre chrome piece that you twist to...

Hi All, Ive qouted a Diff rebuild here for a customer and have all the parts exept the 3.54 Hi speed ring and pinion set..I have gone through all the parts houses on the left coast I know of, they are all out of stock and on back order ,expecting them in April, Cant wait that long, does anyone...

Hi all, Im putting together an A engine for a customer, he supplied it with the babbits redone and crank machined,but unassembled.This work was done a LONG time ago(the Perfect Circle ring set box had a 1966 date on it!) ,and the pistons supplied are secondhand..but in very good condition. I...

Hi All, Thought I'd Throw this up in the vague hope someone would have a usable (dints fine, bead splits fine, bit of rust Ok) pair of 32 Pick up rear fenders, These are the last Sheet metal bits I need to complete my truck, and they just dont exist over here. The other thing I need is half 32...

Hi all, the larger restoration supply places dont seem to list door window regulators for 32-34 pickups.. I have a vague memory of reading they are the same as A model ones.. is this correct? if not, are they reproduced? or even the gear quadrant piece? mine are really worn out. thanks from...

Hi All. Thought I would try to get some help here to see if anyone has experiences like mine with a modified A engine.. Specs are as follows, Standard A engine ,standard head,standard cam. F&S electronic Ignition, 12Volt system,new Champion W18 plugs Ansen cast aluminium single down draft...

Hi there , Currently returning a 1930 A coupe to the road, had it all ready to go, one long drive, and became obvious the gearbox is pretty ruined..it is incredibly noisy in first and second,leaked a quart of oil overnight (!) and obviously needs rebuilding, but I think it may be a total loss...

Hi all, Im after a 33/34 emergency brake ratchet, the thick 90 degree bracket piece with the teeeth stamped in that bolts to the crossmember and holds the handbrake. I cant seem to find it on any repro parts suppliers sites, are they reproduced? happy to buy new if anyone knows where to try, or...

Hi All, Im building a basically stock 239 99A Flathead at the moment, and have run into something I cant find an answer to, maybe someone on here can help.. Im using an old set of .045 over Ford manufactured alloy pistons, four ring style. obviously finding rings to suit these wasnt easy...

I have been warned off the sleeves sold by various parts houses to do this job, so I went to my local bearing supply, and couldnt find an equivalent roller bearing inner sleeve size. the closest I got was a 2 1/16 "dia outer but it is only 1.5" long, not 2 1/4 " as required. two Questions...

Hi all, Rebuilding a 34 (i think) steering box to go into a 33 pickup chassis, I ordered all the rebuild parts from Macs, everything is spot on, except the upper bearing cup. Macs lists the same upper and lower bearing, but they are clearly different in this steering box. The lower cup Ford...

Hi all, I have just pulled down a rather rusted up old flatty,for a rebuild for a customer, it seems like a really wierd mix of stuff, and Im not sure Ill be able to find bearings for it.. As stated it has 81 cast into the block front right corner, Is small bore (3 1/16" + 0.020) has 21A rods...

Hello all, Thought this would be the best place to ask, Im trying to research the origins of an original set of '32 rails i purchased recently, would love an idea of where to look for reference on the net, or even better, someone on here who might Know the significance of 32 frame number...