Search results

Chrome housing, good threads a little shelf wear. $100 + ship

Well after some thought and internal struggle I've decided to upgrade the clutch and trim down my flywheel on the banger. I've been watching all the YouTube videos and reading as much as I can to educate myself on the process and was curious if anyone had a source for all things V8 clutch swap...

Looking for a good 32-34 steering gear box preferably in TX

Looking for a power gen 82001 90amp alternator.

Looking for an Aluminum water pump housing

Looking for a D52 Hollywood license lamp.

set of 32 roadster irons in good shape, nice chrome, perfect latches, mechanically sound.

Doing some work with a buddy and came across a pair of mismatched heads. Can anyone give me the rundown on what the difference could be between the two?

Intake kit $60 transmission pads $20 front shackle kit N/A rear shackle kit N/A

Pair of 18in wheels in good shape, has a few dings but repairable.

Looking for a good pair of 81s

Looking for Chrome garnish, door, and dash moldings for a 29 coupe.

I'm looking for someone who makes an exhuast assembly with NO muffler, anyone out there recommend a vendor?

I'm working a deal online and hit a roadblock on ID'ing the trans. Can anyone make out what Transmisson this is based on the stamping?

Looking for an oil pump to rebuild or runner.

So i went with an aluminum cam gear on my rebuild and beside myself with worry about it being done correctly. I set the wedge key to the 10pm position and rotated my cam to align with the mark on the crank gear and hand tightened everything down for now. Before I button up my cover could...

Looking for a "dressy" timing cover for my banger to shine it up a bit. Anyone got anything laying around? Finned or aluminum?

I’m close to bolting my head down this weekend and was prepping bolts when I noticed a couple of different length shoulders and studs in the pack. I did some hunting and couldn’t really find a location chart and I didn’t take note when I removed the old studs on length etc. Would anyone be...

So, I've been trying to hunt a T spring locally and came up on a 6 leaf from a buddy's farm stash. Light googling and I figure this is a 23-25 unit used on 'RUNABOUTS' those few years. I know I'll need a spacer to locate and center the leaf in the crossmember, but will a 6-pack spring lower the...

Got a killer deal on a 31 high compression head recently and discovered some cracks during clean up. Before I spend a bunch of time and energy on it I decided to seek some advice from the elder statesmen on what could be done. I circled the cracks in the photos and just curious how far I will...