Search results

I'm searching for a Ford hubcap that will cover 40 Ford front and rear hubs and snap on Ford 15" pickup wheels with 4 mounting nubs on the outside. There must be some options?

How do you attach a photo to a thread?

Has anyone found a blackwall radial tire tall enough for the rear of hot rods? I'm looking for something over 30" and under 80$ a tire. The tallest I have found are 4 ply radials 235 75r 15's that are 29". And all are under $80. Coker's are so over the top expensive I won't do it. And trailer...

I am currently using a F-1 steering box in my A V8 coupe with a 40 ford Pittman arm pointing down. How do you convert so the arm is pointing up to level the steering arm? Is there a Ford box that works that's not front steer? Really don't want to go to cowl steer. I'm using a dropped 40 axle...

Can anyone let me know which Pertronix kit Fits my old Mallory YC for an 8 BA?

I've got 2 rebuilt 94's on a plenum manifold on my 8BA 276 Mercury flathead that are not coming around. I have a huge flat spot Under acceleration along with some snapping and farting. Currently they are loaded with 48 mains, 4.5 power valves and the accelerator arms in the #3 holes. Floats are...

Looking for a working 6 grand 12 volt Sun Super Tach SST 803 This is a column mount and all metal. Needs to be in good condition.

For sale complete twin8 with a great cap and rotor, points and condensors. Unmolested and all original. Very rare piece. Includes adaptor for front drive. Turns but tight. Probably due to very old stiff grease. Sold in "as is "condition. photos available. NICE PIECE. Sold......

Anybody found a way to modify a F-1 or F-100 steering box So the Pittman arm is pointing up instead of down on a side Steer install for a Model A to eliminate the sharp steering rod angle? Or is there another box that works?

Here are some pics. Look closely.... Tight spot.

Just installed a VW steering dampner on my A V8 coupe with a 40 axle and split bones, F1 steering box. It fit easily and has plenty of movement to handle the tie rod swing back and forth. Plus it only cost $24! It dramatically improved the searching and wandering common with this setup. Now it's...

Looking for 2 late pickup truck spark plug wire looms. The single loop type with a rubber grommet. Most flathead 8RT powered trucks up through 53 had them. FOUND SOME...

I need a set of 12 tooth spider gears for 39 and up . Just need the 4 gears.

Getting frustrated. I have a 40 banjo that came out of a driving car. I rebuilt it even with marginal axle threads but now have decided to replace the axles with better ones. The passenger side also has about 1/8" end play that wasn't there before I took it apart. The drivers side is ok. Soooo...

Looking for a good tight differential including spider gears. Don't need ring gear,axles or bells. FOUND IT...

Just started driving my flathead powered chopped A coupe. What are the best tire pressures for Coker Firestones 6:00 x 16 Front and 750 x 16 rears and how much toe? Running a 40 front axle with split bones and tube shocks.

Looking for a good set of axles for a 1940 3:78 banjo rear end. Need to be in Good shape, good key ways, threads, gears and tapers.

I have a 40 Ford banjo rear end with excessive in and out axle play on the passenger side. The axle moves about 1/8 of an inch and makes a thunk when going around a corner. The other side is tight. The axle nut is torqued to factory spec. Any ideas what might be causing this ?

Which year or model has the longest rear spring U bolts that will fit a 30 Model A rear cross member?

Which stock Ford square top rear spring u bolts are the longest that fit my Model A rear cross member? I need to raise the rear a bit on my 30 Coupe. Running a 1940 rear end with a Model A spring. The stock bolts are about 1 " too short with spacers.