Search results

wanted original 28/29 drum tail light

WTB original 5 1/8"-6 1/8" chocolate brown door check strap for fine point restoration of 29 station wagon. Thanks Karl

Does any one have information on the correct location of the (5) clips that hold the main wire harness to the bottom frame rail, (pictures or dimensions) ? Thanks KB

Does anyone have a source for ratcheting tire tie down straps that are a good fit on a 21" Model A tire?

Need Early Alemite Grease Gun with "ALEMITE LUBRICATOR" on top line and "THE BASSICK MFG CO" on the bottom line, It also has Fine Knurled top cap. Need to complete fine point tool kit. Thanks Karl 608 827-5824

I need a Original 1929 driver side Running Board Splash Shield with Hump. NOS or in good restorable shape for a fine point restoration project. No heavy rust areas please. Thanks Karl 608-827-5824 bullockcustomfab@charter.net

Does anyone have a 1929 with original dealer installed cowl lights? I am interested in seeing a picture of how the dealer installed cowl light bracket was mounted on the firewall with the 2 bolts that are shown in the service bulletin page 329 fig. 667. A picture of the actual bracket would also...

Does any one have a picture of the brackets that were used when the cowl lights were installed by a dealer as an option in 1929. Thanks Karl

Need original NOS or good condition 6-1/8" chocolate brown Door Check Strap for fine point restoration on 1929 station wagon. Thanks Karl

Need early 2 tooth steering gear housing for fine point restoration. Must have "Gemmer" and "PAT.PDG or "Pat.Pend" on one side. I will take gear housing only or complete steering column. Unit is for March 1929 car.

Wanted good straight original 1929 front bumper that is suitable for replating for fine point restoration. no heavy rust or pitting

;)Need original tanks and side braces for restoration of early 1929 radiator with funnel outlet neck. Condition of radiator core does not matter. Money in hand ready to buy any thing in reasonable shape. Thanks Karl

need original tanks and side braces for restoration of early 1929 radiator with funnel inlet neck, condition of radiator core does not matter. top tank does not have a relief or indentation as found in later 29 radiators. Thanks Karl

Does anyone have a good picture of the original early 1929 top radiator tank with the correct hood support bracket. I am try to put together a original 1929 radiator for fine point judging and the standards are not real clear. Thanks Karl

Need early 1929 starter for fine point car, these starters were used until April of 1929, they have 5/8" shaft but the band on the end is 1 1/16" wide unlike most starters that are 1 3/16" wide. Thanks Karl 608 827-5824

Wanted 1929 front crossmember

I can not fine any pictures or diagrams on how Ford originally safety wired the bolts on the torque tube or rear motor mounts. I have safety wire pliers and have done aircraft & race car safety wiring, but I am not sure this methode will be correct for fine point judging standards. If anyone can...

Does anyone have a picture of how/where the dealer installed cowl light switch was installed under the dash, and where the stop light wire was spliced into the main harness? Thanks Karl

I am in the process of repairing my very poor condition inner rear fender wells for my 150 A station wagon. It would be of great help if any one has any photos of original or restored rear fender wells. I mainly need to see detailed pictures of them installed on the inside of the car. Any help...

Does anyone still sell the original copper head gasket with the white core for a fine point judging ?