Search results

Need one for indented firewall, preferably without holes Thanks

Narrow bed, with tailgate. Needs wood, and U-channel will probably need replaced. Truck said to be originally from TX. Located in SE OH, need to pick-up, or would be willing to meet part way or deliver if reasonable distance Thanks

The guy who had it before me had everything on the generator side Thanks

I hooked up the battery today (new one) for the first time, positive ground. Turned the cut off switch to on and the horn blows constantly. Turn back off and disconnect horn, will fix the stuck button later. Turn the switch back on lights work, great, but the ammeter is discharging at -20 and...

I hooked up the battery today (new one) for the first time, positive ground. Turned the cut off switch to on and the horn blows constantly. Turn back off and disconnect horn, will fix the stuck button later. Turn the switch back on lights work, great, but the ammeter is discharging at -20 and...

Does the 30-31 CCPU use the same 3 hooks along the upper part of the seat that a AA truck uses (pictured below)? If so, who has them? Thanks

I have used the search feature but can't find an answer to my problem. The drivers door on my 31 CCPU requires that I pick it up by the handle and give it a good hard slam to close. The belt rail lines up with the cab at both the front and back of the door, the door striker is new as is the...

How do the bullet ends on the wiring harness attach to the horn, do they push into the 2 copper contacts like the ones in this picture? Thanks

1931 CCPU, repro hinge from Snyder's, doesn't look to me that these 2 will go together. The hinge does go on the inside right, or am I turned wrong? Thanks

Does it go up to and against the cowl band, or slightly under it, or further than that all the way to the cowl? Thanks

who can put in the copper piece in the door for me on my '31 truck. I've read all the previous threads about this. The rubber pieces are in, trimmed to allow the copper piece to go in. Soaped up and slid the copper in, but there is no way in this world that I am going to be able to get the ears...

I put the body on my truck to make sure everything fit and was shimmed properly, it's in primer now. The fenders are painted already. Does everyone paint their body off the frame, or do some people paint it on. It's a pain to get that thing on and off and shimmed right and I don't have a lot of...

Anybody have any experience with it? Do you have to use nitrocellulose thinner or will regular lacquer thinner/reducer work? What reducer to paint ratio should one use? Thanks

I have a gas tank, hood, running boards, splash aprons, and two front fenders (non-welled), from I believe a '30 model. They are free for the taking all you have to do is pick them up.