Search results

When I discovered I had both a Standard and a Deluxe dash in my collection, I decided to restore both back to original. They were professionally painted the factory correct colors. I ordered over $1800 of Bob Drake dash accessories. The gauges are original but refaced. Everything is there as...

I have an extra set of 1932 Ford pickup cab mounting wood. This 6 piece set is new from Mac's. They cost me $118. I am asking $80 plus shipping. Thanks Dave in Spokane (509) 467-8773

I am trying to save another one, this time a '32 Ford pickup. Only problem, it came with a reproduction (fender-less) boxed frame...no mounting holes! The only frame of reference I have are the front spreader bar holes and the (3) mounting holes for the fire wall. I need to know location of...

Cleaning out the garage...here is a new complete set of six Auto Meter "Golden Oldies" 2 1/16" and 3 1/8" gauges with sending units. Save a couple hundred bucks. Asking $450 plus shipping. Thanks for looking. (509) 467-8773 Dave in Spokane

Here is a '40 Deluxe grille wall hanger for sale. It has good side plates,top brace and side grilles. The center chrome grilles are lightly pitted and the bottom chin pan has been punched at one time or other. $300 plus shipping for all of it. Thanks for looking Dave in Spokane (509) 467-8773

I don't know if this is the right place but Part three of down sizing is a whole room full of mostly old Ford models. I will list the 1/8 scale variety. There are so many of them it is hard to list individual prices, the 1/8 scale run between $75 -125. There are Big T '97, Custom T 2000, Big...

Part two of down sizing is a collection of 1940 Standard Grilles (8). They range from an aluminum reproduction, to original to Bob Drake chrome. I sand blasted / painted them all (except the aluminum & chrome) and then added new lower panels, upper braces, '41 Ford crank hole cover and a...

The time has come to start down sizing the collection. I will start with two recently restored 1940 dashes, one Standard and one is Deluxe. All parts are new except the original dash and the gauges. I have $3900 out of pocket invested including $1,800 in receipts from Bob Drake / Dennis...

I am in the middle of restoring (2) 1940 dashes (my favorites) and I need a Standard glove box door that is in good shape. Thanks Dave in Spokane (509) 467-8773 dlstrand@webband.com

Anyone out there know what goes over the windlass on the tack strip running up the sides of the "A" pillars (between the windshield inside molding and the door opening) in my 1940 pickup? And where I might obtain whatever that might be? I am guessing some pieces of a tack hiding material...

I am restoring (2) 1940 passenger dashes (one standard and one deluxe) and purchased new gauge face sets. I discovered both of my amp gauges were '41 pickup style (where the face plate has 3/8" long attachment arms on each side to the gauge). I am after (2) '40 passenger style amp gauges...

Hey guys, I just pulled the head and intake on my 59AB in my basically stock 1934 1 1/2 ton to free a sticking valve. No big deal. Upon reassembling everything with new gaskets, it starts to overheat and upon inspection find water in the oil pan and all over the garage floor. Removed and...

I bought it for the great sheet metal to do a pickup and didn't have the heart to strip a good truck. I am at a point where I have enough projects to last my life time and would like to regain the garage space. So what we have is a '46-48 flathead powered, four speed, retired wood hauler now a...

I am looking for the original style but longer than stock (about 1/2" would do) rear wheel studs for my 1940 Ford pickup. I have a set of after market wheels I want to run for some variety but don't have enough threads showing to feel safe about using the stock length. Any one know of any...

Can anybody tell me for sure... what is the difference between '34 1 1/2 ton truck front fenders and '32-34 pickup front fenders. I have heard all sides of "I think" guesses. Had thought of building a pickup out of my '34 truck body parts but it is just to darn unique as the original. Scares...

Went with the suggestions in my past post, I bagged the 11"set up for my mildly built '40 engine and went with a new Ft. Wayne 9"clutch and pressure plate and just had my stock '40 fly wheel turned. I heard of people lightening the flywheel by cutting down the lip on the clutch side. Good...

Hello Guys, Getting ready to put a mild built '40 Flathead into my '40 pickup. Pulled tired stock one had a worn 9" clutch and the built engine has an 11" on it. I don't want to have to redo installation so I am replacing everything with new parts including clutch and pressure plate...

Looking for a matching set of 15"x6" American Racing Torque Thrust wheels for early ford 5 on 5 1/2" bolt pattern and a matching set of 15"x7-8 1/2" for the back of my "Patina pickup!" Thanks Dave in Spokane (509) 467-8773 Might consider look-a likes!

Hello, Looking for a matching set of (2)Torque Thrust wheels (15x6) for my stock '40 pickup with a 5 x 5 1/2 bolt pattern. Also interested in same in 15 x 8 1/2 for the rear. Thanks Dave in Spokane (509) 467-8773 dlstrane@webband.com

Looking for 1940 Ford Standard/'40-41 pickup grille parts, especially passenger side cast grille half. Dave in Spokane (509) 467-8773 dlstrand@webband.com