Search results

is it a good idea to coat gaskets with sealer on both sides ? im using cork. thanks for any help, mike

I have a 1930 and was wondering about sight glass nut, the one I have is a hex nut but only see ones with 8 sides and don't look right. any one know what I have? thanks for any input, mike

any one know what clearance should be between drag link and the top of the tie rod , mine looks like they might be rubbing or close to it. thanks for any help. mike

anyone ever have to shim out dovetail on door jam ? mine seems to be making contact on the end about 1/4 inch. thanks, mike

does anyone know how thick the top and bottom seat spring are ? the ones I bought when I was 14 have a plywood backing and seem way to thick compared to ones I have seen at shows. I am not the same size I was at 14.i am almost 64 now and due for something else that is my size. be 50 yrs. in...

I measured my radiator thickness it is 2 1/2 inch thick total in rad frame support, and core is 2 inch thick, what core row would that be ? thanks for any information , mike

any one know of a good adhesive remover, trying to get off adhesive backing from a strip of street rod hood lacing I had put on years ago and do not need now that I got my doors aligned right. thanks, mike I have tried 3m adhesive remover with no luck. lace is on the outer inside door edge

any body see a problem with installing it up against radiator inlet ? thanks , mike

Has any one had a problem with installing an original muffler pipe clamp on the aries muffler ? Mine seems way too tight. Muffler pipe diameter is a little bigger than the one i took off that i bought 40 years ago. Im talking about the frame clamp. Thanks

just installed a new ceramic coated manifold from snyders, put on a new aries muffler , my question is will the new manifold create more engine heat . maybe its me but after a 5 mile ride the engine room seemed hotter than before. i replaced the manifold because old one was warped and had a...

I am going to go thru my exhaust system, new gaskets, muffler, etc.i figure to check valve lash with all the room i have. Question, valve lash .013 intake, .015 exhaust , hot or cold ? Thanks, mike

any of you happen to know mounting dimension holes center distance ? any pics of wiper inside and out would be very appreciated. not that i need a wiper in so. cal . thanks, mike