Search results

I have a 1941 ford drive train with 378 gears. new brakes and drums. three speed column shiftier with new clutch and pressure plate and resurfaced flywheel about 500 miles on them. trans works well ,as well as the banjo worked well changed drive train out... mike 612-850-9134

hello anyone have information on body mounts on a 1941 coupe? how many ? and where there placed? thanks for your help mike

installing new rubber on the running boards a few questions I have. should the surface be paint free? and do you bolt threw the rubber in the two spots the arms come out from the car? or should the bolts be flat headed under rubber? and who has the better rubber to install. thank you for...

does anyone have a good picture of the package try in a 41 tudor coupe that they could share with me trying to redo mine and have nothing to go on.. thank you mike

I have a1941 ford coupe and installed a backup camera, right now its hooked to the parking lights cant find mirror's that work on that car:mad: so the back up camera works well but with out backup lights I am trying to figure out how to switch the camera on other than the lights?? any on have...

what should I have for jets and power valve? 59 ab duel carbs offy heads offy manifold max 1 cam .030 over any thoughts thanks

need some help took the hinges off the car and the spring support tightened up the rivets a little put everything back and when the spring bracket goes on the hood lifts at the cowl. any ideas other than dumb a.. why didn't you take pics. maybe some pics of under hood or some thing I am...

just got done trying to work with the hood hinge supports on the car got them from B drake. the box lists them for late model 41 but the hood never changed over the year. first off they cant even send the nut with the parts that hold the bracket to the car. (come on guys) then it mounts...

Edelbrock 94 knock offs (buly 94s) anyone had or heard of them? had them on the car Two carb set up on 59ab new motor, about an hr running and blown power valves and rubber seals gone??? tested gas 8% alcohol, I have two questions. #1 will alcohol make the things go bad that...

hello all. just got this motor running and runs well thanks to all that helped ! I have a few things to ask, as you can see in pic the fuel lines is there anything anyone can share about different ones maybe pics of yours? to give me some ideas. second the carbs the carb that is closest to...

Got the motor in the car 1941 ford 59ab motor with offy 400 heads 3speed column shifter and the rod for 2nd &3rd gear hits the back side of head. The lever is cast so I don't think I can bend it? I did make it shorter and it looks like it goes in gear on both but the neutral position seams...

I have a pvm valve that just started leaking. Not doing anything leaking around the rubber plug. It's about a year old. Should the rubber plug be on the top? It's on the bottom now.

just getting ready to fire a flathead from rebuilding it :D the question is how to time it? it has a Malory distributor I have TDC marked anything I need to do and what degree should I look for? someone told me 4degrees after TDC ??? thanks again Mike

when wiring the headlights 12 volts. do I or should I use a relay? do the wires coming from the relay to the lights have a smaller wire? thanks for your help!!!

what's a good oil to use when starting a motor the first time new cam/rings/bearings . any additive's ? suggestion's?

which way does the flange I will call it on cam bearings face on an aba motor front or back of the motor? my dementia set in lol thanks :)

starting to reassemble my 59ab with 8ba crank. so should I install the valves and set them then the crank? or what is the most popular way in starting? all new parts. thanks :)

I have never really heard this before when installing new aluminum offy heads. there is instructions in with the copper gaskets to paint both sides? then it says to torque the heads from one side to the other, like left to right or right to left?? and to start the motor with no water or...

I have a 59AB the crank main bearings come out to .004 .005 .006 .004 is the rear looks like the book says .005 is ok.. I am installing new rings one peace valve guides new valves. cam looks ok crank is on the edge free floating rod bearings. so if I get the crank turned and...

on a flat head what type of sealer is best to use on the head studs?? that go in the block