Search results

New coil, Distributor and Carb from Charlie NY, new plugs and plug wires on a 59AB. All cylinders have good compression at about 110. Number one and two cylinders show no change when plugs are shorted to ground. Both are getting hot spark to the plugs and through the plugs to the electrode. It...

Been getting mixed answers on what coil to use on a 59ab 6V pos, with a crab distributor. The car, a 35 Ford, with a 6V 59AB has the original under dash ballast resistor for the old style coil, so I assume that using a modern can coil, I wont need it. The confusion comes on weather to use a 1.5...

Anyone have any information on this tester made by the Harvey H.Hanson Co. I tried google without any success. Thanks

Anyone have any information on this tester made by the Harvey H.Hanson Co. I tried google without any success. Thanks

Original 30-31 roadster top irons. SOLD

This made me laugh.

Was there a rubber weather strip mounted to the top iron for the rear of the door windows to seal against when rolled up? The area in question is marked with a piece of blue tape in photo. I have a piece of stainless channel with a rubber seal, just like the one mounted on the windshield frame...

Another Texas Tour with old Ford friends from across the state, driving back roads and seeing places that I never knew existed.

30–31. Roadster top irons for sale 30-31 roadster top irons with hardware. No wood bows.$250 plus shipping from Texas.

Looking for a 30-31 open car door hinge to be used to repair one on my car.

I know this is a loaded question but after several searches here on the forum I came up empty. Asking the rebuilding experts, what power valve for a 94 do you recommend? I am at 500 ft. elevation and running a 59AB, so is 5.5 the correct PV? Thanks in advance.

What PV washer are most using to stop the leaking, nylon or round fiber washer. Thanks John.

Looking for a top boot for a 30, 31 roadster.

39 Standard Coupe, fresh rebuilt engine, Mitchell overdrive, radial tires, Spyder Hubcaps, Le Baron Bonney upholstery, ready to tour. Comes with additional original engine and many parts. $30K. Located in Plano, Texas jocarothers@aol.com for pictures or more information.

Anyone know of a source for a open car, roadster, passenger side sportlite mounting bracket? Thanks, JC

Anyone know the dropping resistor value used on a 6v Model A horn in a 12v system? Thanks, JC

The stainless stanchion on the right side on a 30-31 roadster has no mounting hole for a mirror, and I would like to drill and add a mirror just like the one on the drivers side. To do this the back SS cover plate needs to be removed to attach a nut to the mirror, but I'm not sure how the best...

I'm getting ready to order led 1157 bulbs and I have seen post here where several of you have installed them, so my question is has anyone tested the red vs the white leds and which one works best? They are going on my 39 std and i'm ordering the 1157 BAY15D 6V non-polarity, purchased from...

Wanting to remove the front brake shoes on a 1939 Ford Std. and need to know how the anchor pins at the bottom of the shoe come out. I have removed the two nuts on the back but don't know if they are pressed in or screw out. Also I have been told that the short shoe goes to the rear, is this...