Search results

I have a very nice 1940 C10 Chevy truck I would like to swap for a Model T roadster. The truck is solid with very little rust. I'm told the engine is not a 1940 but rather a early 1950's engine. I'm not a Chevy guy so I don't know the difference. I got it about 5 years ago in a swap. Its geared...

I have an old **** I would like to swap for a model T ***** and I was wondering if it is allowed to post on this site. Thank you.

Is there a way to balance the model t wheel/ tire? I get up to around 38 or so and the tires start to shake. It would be great if there was some kind of adapter a person could use to spin balance them.

Has anyone ever used aluminum foil around the 1/2in sparkplug to tighten loose threads in an aluminum head. I think one of the plug hole threads in my aluminum high comp head are getting worn. I don't like the way it feels when I tighten the plug.

I'm helping a friend with his Stewart vacuum fuel pump. I cant find the right size fitting for the fuel inlet. Anything I try is either to big or to small. All the other holes are 1/8 and 3/8. But the fuel port is an odd size. Anyone know what size it is and where I can find it? Thank you.

I have somehow lost my rear saddle for the top to lay on on my 19T. Would anyone have one I could buy?

As I mentioned, I got the Model A running great. This was only the 2nd Model A I ever worked on. Monday the car went home to NC. I think I mentioned the owner is suffering from Alzheimer's disease and its taking it terrible toll. It was mentioned once that someone said they saw where this was...

The 28 is running like a swiss watch. The gentleman I worked on it for did not want to drive it but he was all smiles!!! I did take him for a ride though. I have a couple of videos if someone can help me put on the forum. I can send them from my Iphone to you.

Question on this Model A Iv been working on, I switched it back to 6 volt pos ground. I removed the 12 volt coil and replaced it with a 6 volt coil. I installed the hot wire on the neg side of the coil and the points side to the pos side and I checked my voltage to the points by removing the...

Iv complete rebuilt the this Zenith carburetor and would like to know how many turn on the air and the fuel mix should be a good starting point for starting the engine. Thank you.

If it wasn't for bad luck,,,,, I put the head on and torqued down the very slowly at 10 pounds at a time until it reached 55 pounds of torque. I moved on to install the carburetor. Went to my tool box to grab a wrench and heard this loud bang. At first I thought my shop light fell on the floor...

Couple someone please help me post photos. Please give me step by step instructions on how to do this. Thank you.

Would anyone have a venturi extraction tool for a Zenith carburetor I could buy/ barrow?

An older gentlemen brought me his car to get running after it had sat for over 10 years. It took me a week just to get the head off. I found that coolant had seeped into number 3 and 4. The coolant had pitted the cylinder walls on 3 and 4. After 3 days number 1 and number 3 will no longer hold...

I'm helping a friend with his 28 Model A. When I went to move that large wire casing that goes into the disturber the backlight cap on the firewall fell apart. Where can I find another one? I called Synders and they only have it available if you buy the complete wiring kit. I don't need a whole...

Tommarow I'm going back to Neals and see if we can get the brakes working in the 31. At the moment there no brakes at all but it does have full pedel. What should I look for first?

Here it is guys, Her first drive under it's own power in 61 years. http://www.youtube.com/watch?v=NmFSifLb3v0

I have been helping my friend Neal rebuld his 31 Model A all winter. I would sometimes leave his garage so cold I lost feeling in my feet. Today after 6 months work she ran for the first time in 61 years. Tommarow he drives it for the first time. I have a feeling Neal wont sleep a wink tonight...

I have a friend that is moving to San Diego, CA and I was hoping I could hook him up with a local club in the area

Who makes the 12V starter for the model A