Search results

Guys who went to Hershey this year? Is there still heaps of ford bits there? ( mainly 35 bits ) ! Is it worth the trip over from Australia? Dan.

Guys I’m hoping to find the rear seat latch on a 35/36 flatback. There’s 2 halves of the latch, one screwed to the top of the rear seat and one screwed to the parcel shelf behind the seat. Thanks Daniel

Guys I have an excellent 35/36 speedometer adapter used when using a Columbia 2 speed axle. This is a spare unit and I’d like to swap it for a B-2 control valve. Or if you have a B-2 valve you want to sell I’d buy it from you and then this adapter will be for sale outright. Hope this all makes...

Hi I have this new reproduction 36 greyhound mascot that has never been mounted. They’ve been nla for around 10 years and extremely difficult to find in any condition let alone new. Located in Australia but price includes postage to USA and Europe.want more photos let me know. All 3 screws are...

Hi guys. Because my cars are Rhd it’s no use buying the off the shelf floor mats for 35/36. I could cut all the pedal holes out on the rhs and glue them over in the left side but I may as well just buy plain rubber matting here and cut it to shape. But could someone take a photo showing what...

Hi guys I would like to buy a 35 Columbia control valve. This is the B-2 hi-low control valve that mounts on the engine side of the cowl. I can swap a 35 speedometer adapter that converts the speedo to hi low speed. Would buy a complete set of controls if you did not want to split up a complete...

Guys my Motor city flatheads engine , approximately 276 cubes, has a Mallory crab distributor on it. The engine was running rough and now won’t start and this afternoon I noticed some of the contacts in the cap are worn out( looks like the rotor button was touching a few on one side of the cap)...

Well I finally got to drive the 35 convertible sedan frame outside today under its own steam. Just the Columbia controls to finish off the mechanical components. Then I was able to lower my hoist to get the roadster outside, ready for an inspection and registration tomorrow. It’s only been off...

Guys has anyone used a 37 pitman arm on a 35 steering box? They are approximately 1” longer and I’m wondering if it may make the steering just a little easier with the extra 1” length. Anyone got any feedback on this? I have a fully rebuilt 37 steering box , but unfortunately it doesn’t fit with...

Guys can anyone give me the correct installation method on installing the wind wing glass and brackets on a 35 roadster staunchion? Is the little rubber glass pads vintique supplies sufficient in securing the glass? Or did anyone have success using black windshield silicone? I don’t know, first...

Hi guys. Can someone tell me the correct thread size of the vacuum hose clamp in the top of a 35/36 roadster, phaeton windshield frame? There’s only 1 in a lhd car, 4 on our Rhd frames. Thanks Dan. Ps I’m assuming it’s 10-32, but not sure

Guys I’ve done a few searches, but can’t find detailed photos of the vac hose that comes up through the cowl top up beside the left staunchion and along the windshield frame to the wiper motor on a 35 roadster. I’ve had an electric motor for the last 40 years. I’m undecided yet whether I will...

Hi guys. I’ve managed to find some time to try and finish the final items to get my roadster ready for registration. It was easy to remove all the fuel with the electric pump, and then clean both fuel filters. The engine fired straight up with some fresh fuel. It’s running a bit rough, maybe...

Guys my buddy asked me a question tonight and I don’t know the answer. Can he use an original 1935 50 lb oil pressure gauge with an 80 lb oil pump and 80lb sender unit? His Aussie 35 coupe Ute will be running std 6volt wiring harness. Thanks Dan.

Guys is there anyone selling new 35 gauge faces for the amp/temp and oil /fuel gauges? I have some nice chrome bezels with good back plates and plenty of the actual gauges, but my face plates I have are faded or heavily marked to the point where I’d rather rebuild this with better face plates if...

Guys I bought a 34 luggage rack years ago to use on my 35. It was missing the 2 smaller brackets that brace it to the main bracket . I’m in the process of getting 35 brackets laser cut to complete extra 35 racks, but my question is , are the 2 smaller brace brackets the same on a 34 as a 35, as...

Hi guys I’m about to reassemble the rear brakes on my roadster Ute. I have a set of Flathead Teds floaters too. What’s the best grease to use in assembly and should the wedge and rollers be greased or left dry to avoid contamination of the liners?

Hi guys. Can anyone identify this rear mechanical brakes for me? The set on the right. The left set is 35 and there’s nothing the same.

Guys does anyone know if there are oversized hinge pins that are longer for the mirror on 35-48 mirrors? I can find heaps of std length oversized pins. I don’t mind if I have to buy 2 mirrors to get the oversized pins. And can be curved or straight arms, stainless or painted black. Thanks Dan.

https://www.facebook.com/share/p/17UV7DXCvw/?mibextid=wwXIfr