Search results

is this socket still available?

i am getting ready change the oil in my old toro. it has a rather large oil pan plug.will the oil-pump fall out if i take it out? i don't need any supersizes.

thank you so much for your help what a great find. thanks

what was the voltage system on a 1948 toro tractor? 6 or 12 volts positive or negative ground?

Thanks, i will take a look tomorrow here is the numbers i found on the tractor. tractor #29149 model b general motor #a.v.9.2.2.5 8n ford industrial 134cid flathead 4cyl i would really like to have a good picture of the distributer (straight on view) if you need more pictures from me just let me...

here is what i have. Can You give information on it?

I am looking for someone to help me gather information on a toro tractor. it has a 4cyl engine, it is a flathead block with the distributor on the front of the engine. Any help would be greatly appreciated.

I am still looking for a radiator for a 1929 ford model a closed cab truck. I also am looking for the screen and spring gas filter for the early sediment bowl that mounts on the firewall.

i am still looking for one

yes, it can be done. I just finished up putting in the 2 sector bearings in from the engine compartment. once you take the steering wheel collum down you can pull and twist the collum anywhere you want it. I made a puller to remove the 2 bearings at the same time, not much trouble at all. I then...

thank you sir for your input

Mr. terry I think you misunderstood my question. I did not mean the steering wheel shaft but only the 7 tooth sector shaft. the only 2 things it might hit is first the starter and if it gets by the starter then it could hit the motor block. I hope this helps.

can the 7 tooth sector shaft be removed from the steering box without removing anything from the frame or motor?

I am looking for a good radiator for a 1929 ford model-a closed cab pickup truck. Let me know what you have.

i did check the temperature it was 140-160 f. the coolant seams to stay at the top of the radiator tubs. i thought about the head gasket but wanted other opinon's

i have a problem with my radiator boiling over when i go up a hill. can someone help me solve this problem?

did the 1929 ford model a pickup truck come from the factory with rear bumpers or was that a dealer add on?

Good morning men.sorry about the typing error, sure am glad there are people here on the ford barn that are smarter then i am. If you see something else let me know, i have made the correction.

sorry about it being upside down. that should be my next lesson,on how to operate a computer ha!!!!!!!!!!!!!!!!!!!!!!!!!

SUCCESS:all of your work has paid off. what the problem was first was my lack of understanding of the powerhouse field winding. when i wound the coils i wound them all in a cw direction and then flipped every other coil giving them an (n,s,n,s,n,s, layout on my work table and labeled each one as...