Search results

  1. A

    1936 Ford License Plate Bracket

    I would like to put the front license plate bracket on my '36 but I can't seem to find any place to attach the original type bracket. Anyone know where it belongs? There are two holes at the bottom of the bracket but no matching holes anywhere on nither the bumper nor bumper bracket nor the...
  2. A

    1936 Ford License Plate Bracket

    I would like to put the front license plate bracket on my '36 but I can't seem to find any place to attach the original type bracket. Anyone know where it belongs? There are two holes at the bottom of the bracket but no matching holes anywhere on nither the bumper nor bumper bracket nor...
  3. A

    1964 Ford closed door won't unlock

    My 1964 Ford Galaxie Convertible won't unlock with or without a key and from neither the inside nor the outside. The door handle button goes in but nothing changes. The door is closed so I can't even remove the inside panel to work on it. Any ideas??
  4. A

    1936 Speedometer / Odometer Question

    My speedometer never did work so I bought another one from ebay. The problem started when I took the face glass off and cleaned it. I also wiped the face of the speedometer with a dry soft cloth. the whole row of numbers on the odometer smeared beyond recognition. Anyone know where I can get...
  5. A

    1936 Tie Rod Thread Pitch

    Does anyone know the thread "pitch" on the Tie Rod of a 1936 Ford with 11/16" x 18 Thread? Thanks
  6. A

    1936 Vehicle Identification Number

    Can anyone help me read my VIN? It should be for a 2Dr '36 Cabriolet. Thanks 2940186
  7. A

    1936 Steering Box Lubricant

    What lubricant works besst in my 1936 Ford steering box? Thanks
  8. A

    1936 fuel sending unit ohms

    I am attemptong to change the Sending unit in my 1936 Cabriolet. My 36 has a 12 Volt system with a resister in front of the original dash gauge. I have cut the hole in my trunk floor thanks to help locating the sender from you guys. I believe the correct ohms are 10 full tank and 73 empty tank...
  9. A

    36 Cabriolet Top

    Can anyone send me a post or a picture like this top angle of a finished 1936 Cabriolet. I am mainly interested in seeing relation of the irons and the rubber insulation that seals the back of the window when rolled up. Thanks
  10. A

    1936 Cabriolet Top and Back Window Glass

    Finally geting to the top on my 36 Cabriolet. Does anyone know of a shop that still makes the Convertible top. I also need the rear glass. I am told the glass is thicker than conventional auto glass. Anyone have any knowledge about the glass or top?
  11. A

    1936 Cabriolet Top and or Rear Glass

    Finally geting to the top on my 36 Cabriolet. Does anyone know of a shop that still makes the Convertible top. I also need the rear glass. I am told the glass is thicker than conventional auto glass. Anyone have any knowledge about the glass or top?
  12. A

    1936 Cabriolet Gas Tank Sending Unit Location

    Does anyone have a picture or drawing showing the location of the gas tank sending unit Access Hatch location in the trunk of a 1936 Ford Cabriolet or Rumble Seat Coupe. My 36 has no access door in the trunk. It must be a replacement floor. I NEED the hatch in relation to other objects in area...
  13. A

    Heater in 36 Ford

    I am attempting to install a early 1940s Car Heater in my 1936 Cabriolet. The car is 12 volt and I will use a reducer for that part. I intend to Install on the center trans hump and I may hang it behind the shifter. Has anyone done this? Any Ideas? Thanks
  14. A

    36 Cabriolet Top

    Anyone know where I can buy a convertible top to have installed on Long Island? It seems that most auto upholstery shops don't want to make the top. They want me to bring them the top and they will install it. thanks.
  15. A

    1941 Heater in 36

    Does anyone have information on putting a 41 heater in a 36 Ford?
  16. A

    To Do

    To all who have contributed to my '36 build and other builds. Merry Christmas and Happy Holidays
  17. A

    Rumble lid Striker Plate

    I have been looking for a striker plate for my 1936 Ford Cabriolet --"Rumble Lid Striker Plate" There seems to be confusion between the Club Cabriolet Rumble lid striker and the Cabriolet Rumble lid striker plate. Anyone have a picture of either or both in the car?? and Where I may get one. Thanks
  18. A

    wanted 1937 1938 1939 ford steering box

    wanted 1937 1938 1939 ford steering box
  19. A

    1936 steering Upgrde

    Does anyone make a adapter to bolt to the original mount on a 36 so I don't have to chisel the rivets of ? I want a bolt on for a Vega or upgrade to steering in my '36 ??? What is involved in changing my '36 Ford steering gear box, worm/sector, to a '37-40 worm/roller ??
  20. A

    1936 steering options

    Anyone know a better option than the '36 original steering box that is not a tremendous project. Winter is coming and I don't mind a project but I want to keep my original column and wheel. Thanks
Back
Top