Search results

Seeking 4 Ford moon hubcaps to fit a 17.5" wheels. The diameter should be about 8 7/8" Must be in excellent condition.

Ok...so I have replaced my widow maker rims with 17.5" rims. Coker tire tells me I can use these inner tubes with their 17.5 x 8.5 Bias ply but they have offset valves. http://www.summitracing.com/parts/cok-86260 Does anyone else know of any other sources for a 17.5 inner tube?

Henry w/ Tom Edison and Helen Keller, his two very good friends, out on Cape Cod. I have the original picture...That's why you see the flash in the pic...a pic of a pic!!!!:confused: Sorry it's so small It's being difficult..

The attached picture is my grandfather sitting in the US Mail truck he drove in the first years of the 20th century. I can't make out the name of the vehicle. It is obviously a chain driven vehicle early model truck. It's not a Ford and there is a name off to the left just besiode the brass...

The first time I went to top off my brake fluid I couldn't believe where I found the filler cap of the master cylinder. It was under the floor pan of the driver's seat! I had to get on my creeper, slide under the truck, and awkwardly fill the resevoir. Needlessly to say, I spilled half of the...

I am about to take delivery on my newly restored 1951 Ford F-3. It has the Flathead V-8 I have had the same oil in the crankcase for the last 10 years. We started it the other day and the valves are telling me they want fresh oil. What brand and type oil would you recommend I put in the engine...

Two headlight bezels, one Ford emblem, and one set of FORD letters.....Bank Cashiers check of good personal check held for clearance. Shipped USPS in appropriate box and paid by buyer Edit The file won't take the pics of the emblem or the FORD letters. Email me and I will attach them.

I have 4 widowmaker 17" rims on my newly restored 1951 F-3.:( They are all in good shape but "Stu" has me paranoid about running down the road on them. I only plan to go to local shows, cruuise nights, and fairs, but I am still concerned one could blow off and cause an accident... I have...

I restored a 1951 Ford F-3. I have spent a fortune restoring this truck:( In the middle of the project we found the frame had been repaired above the rear spring on the passenger side of the truck.:mad: It is a very good repair but none the less a repair. :rolleyes: I can buy another frame off a...