Search results

Okay. I'm working on a 36 Cabriolet. I have replaced the original distributor with a 11A rebuild from third gen. I also went with the different coil setup. Still 6 volt positive ground. I have bypassed the resister under the dash. I have 6 volts at the coil with ignition on. My ignition source...

Boy I had a great time with this. Earlier I started a thread about a noise coming from the torque tube and you kind gentlemen told me the culprit was the pin that holds the driveshaft to the pinion. You were correct. Now getting to it was a challenge. I had learned that if you remove the torque...

My 36 is making a noise coming from the torque tube. While going down the road you can hear what sounds like a playing card in the spokes of your bike. The faster I go the faster it goes. I put it up in the air and verified that it was coming from the tube. Any suggestions or comments would be...

I have a 36 Model 68. When I touch the brakes the headlights go out, when I release they come back on. So far I have replaced the voltage regulator, rebuilt the generator, replaced the brake switch, lastly I'm ready to replace the headlight switch because looking at the wiring diagram it seems...

Good morning fellow Ford lovers. I have a 1936 Ford Model 68. I'm just starting to chase ghost in my wiring. When I have the headlights on and touch the brake my headlights turn off, when I release they come back on. I am noticing that prior to touching the brake that the lights have an...

Hello again follow Ford guys. I have another mystery. The 36 Model 68 I have had a 6 volt coil setup of the modern kind. I am in the process of changing it back to the original coil that sits on top of the distributor. I sent the original type coil to Skip down in Florida and he sent it back all...

Good morning everyone. I have a 1936 ford 5 window that I'm removing the more modern coil set up and going back to the original setup. I have just got my coil back from Skip and have the new condenser from 3rd gen to use but I'm trying to figure out the hook up part from the condenser to the...

Good afternoon everyone. I have a 1936 ford 5 window that I'm removing the more modern coil set up and going back to the original setup. I have just got my coil back and have they new condenser from 3rd gen to use but I'm trying to figure out the hook up part from the condenser to the coil. I...

If anyone could help with this problem I would appreciate it. My left front brake has a harmonic sound when I brake. Can't seem to figure it out.

I have a question. I have a 36 5 Window Coupe and the fuel gauge is not working. I have 6 volts at the sender. I also grounded the power wire on the top of the sender and watched the gauge to see if it moved and it did not. I'm thinking the gauge is bad. What about you?

I have a 36 Model 68 and i'm having a fuel gauge problem. I have 6 volts at the sender but the fuel gauge still reads empty. Any help would be appreciated.

Good morning. I'm new to the Ford family. I just purchased a 1936 5 Window coupe. I'm looking for some type of bug protection. Does anyone offer a type of bug screen for the fenders, grill and so forth?