Search results

I am looking for someone to help me gather information on a toro tractor. it has a 4cyl engine, it is a flathead block with the distributor on the front of the engine. Any help would be greatly appreciated.

I am still looking for a radiator for a 1929 ford model a closed cab truck. I also am looking for the screen and spring gas filter for the early sediment bowl that mounts on the firewall.

can the 7 tooth sector shaft be removed from the steering box without removing anything from the frame or motor?

I am looking for a good radiator for a 1929 ford model-a closed cab pickup truck. Let me know what you have.

i have a problem with my radiator boiling over when i go up a hill. can someone help me solve this problem?

did the 1929 ford model a pickup truck come from the factory with rear bumpers or was that a dealer add on?

I am in the process of restoring the powerhouse generator. I have the rotor motoring just fine and in the right direction. I polarized the field winding. I checked the cutout and all looked like it should work. Here is my problem,when i rotate the generator on a test stand it acts like there is...

is the powerhouse generator a positive ground or a negative ground?

i need a re builder to answer some technical questions about the powerhouse generator. i can not get the part to motor in the right direction,it will only very slightly jog in the opposite direction. i have tried everything like switching the ground and field lead, switching the field around the...

I am looking for several parts for a powerhouse generator.i need the 3 brush springs and other parts. Let me know what you have.

i have a 1941 Lincoln v-12 engine that i am tearing down. i am having trouble getting the oil pump out. i removed the 1 screw that is obvious but is there something else that may be holding the pump in?

i have a 1941 Lincoln v-12 engine that i am tearing down. i am having trouble getting the oil pump out. i removed the 1 screw that is obvious but is there something else that may be holding the pump in?

i am looking for a good rebuild-able shock absorb-er for a 1929 model a ford truck. it must be the ac for the right rear. send me a picture of what you have. steamgas0@gmail.com

i know this question has been asked before but i need to know where to go to get the information i need. my rebuilt engine runs good but i need to now set the spark timing. i know it has an adjustment on the side of the distributor but before i do anything i need to know what i am about to...

i know this question has been asked before but i need to know where to go to get the information i need. my rebuilt engine runs good but i need to now set the spark timing. i know it has an adjustment on the side of the distributor but before i do anything i need to know what i am about to do...

can some one tell me the maker and part number for the filter for my add on oil filter? as best i can tell it is 4 1/2" outside diameter and 4 1/2" long.

i just inserted the fuel pump rod down onto the cam lobe but there is no lift on the rod. what am i doing wrong?

can someone describe the function of the oil baffle (part # 6524)? there are 2 of theses parts in the engine just under the carb manifold that are attached by spring force to the oil galley tube.

i have a question about the oiling process of the lifters and valve assemblies. how dose any oil get to the upper part of the motor? what am i missing? i see no oil ports at all oiling this part of the motor.

what is the diameter of the front crankshaft pulley?