Search results

Pair of Model T headlights. Rusty, but solid with parts that should be restorable. The lenses are different. I don't know much about Model T details, but these should be good to help restore one. Price includes shipping to USA can take PayPal friends and family at kimeccles@comcast.net Or...

This is a new black rumble seat kit purchased from LeBaron-Bonney several years ago. It includes the big pad that goes on the springs, and the two padded seat back and bottom sewn covers that are precut to put on the springs. It has 4-inch to 4-1/2 inch channels for 1930-some 1931 cars. It has...

sold

Pair of restorable Model T headlights. Rusty but all parts are there as far as I can tell. The lenses are a bit different. I don't know much about them but want to get them to someone who can use them. kimeccles@comcast.net

New Model A rumble seat upholstery kit SOLD This is a new black leatherette rumble seat kit purchased from Bratton's several years ago. It includes the big pad that goes on the springs, and the two padded seat back and bottom sewn covers that are precut to put on the springs. It has the hog...

Are these Model T headlights? Are they worth selling? I got no answer on the buy sell swap site. Thanks

I have a pair of headlights with lenses that are Ford script, but different. The cans are rusty, but probably restorable and seem to be all intact internally.

I took this set of 4 shocks off a 1930 Model A, but I think they are from a V8 series in the 1930's? Looking for info on what they go on and what would be a fair selling price? Pair of arms are F-872 and F-937. I bought a set of Stipes, so these can go to a new home. Thank you for any...

I see after Oct 1929 the engine splash pans, per the Judging Standards and Restoration guidelines, only have the rear side of the pans use the oil pan bolt at the rear to hold them up from the bottom on the engine side. The front side hole tab was removed. The 3 frame bolt holes remain intact...

I looked in the latest MAFCA Restoration Guidelines, but I could not find information on how to correctly finish the drums. I know originals for my 1930 were steel, but the guidelines do allow for new cast iron drums with only a slight deduction. Late 1931 they were revised to cast iron, as it...

Here is a picture of the door pulls from the garnish above the door panels. Same as Fordor. The top 2 are chromed pot metal and have some uneven areas and gouges that look like they were made that way. They have a circle on the bottom with number 12 under a C with little circles around it...

Hi, I received an old LeBaron Bonney upholstery kit for my 1930 68B and it has 6 of these material stripes, 3 per side? They are about 1-1/2 inch wide and 59 inches long and I have no idea what they are for? Are these for a different car, or are these for sewing on the edges of the top...

On the Cabriolet top there is a pin (attachment shown) to hold the #2 bow into the triple hinge. This pin goes into the hinge from inside the car. It can slide or vibrate out and could fall out. According to an old drawing it says it needs to be swedged or peened? on the outside to hold it in...

I have lost track of progress on these to know if they have been made by anyone and available to purchase. I need a set for my top install and wondered if any are available at all now? I didn't find them in the swap section recently. Thanks

Here is a picture of my wood belt rail. I am getting ready to put the package tray fabric over it. The edges of the wood are not rounded, and the connection around the corner where the metal bracket is is offset and very uneven. Is the wood supposed to be sanded or rounded on the edges like the...

Here is a picture of my package tray from ex LeBaron-Bonney kit. The two seat holes slots are shown. The back is slid into the 4 clips against the belt rail material. The front has three places with holes in the metal tray to put brads down through the material and board into the wood. Note...

If this should be a "for wanted" post, sorry, but it said "parts" wanted and this is a service or restoration wanted. We have a 1930 straight window Cabriolet all mostly restored now except for a new LeBaron-Bonney top kit and interior panels that preferably should be installed by a person who...

Hi, I am looking for the pair of original nickel plated 5/16-18 thread special bolts to buy (or a picture of what they look like) that hold the folding top iron to the mid-bow metal landau bracket. I have a std. hex bolt for now. Picture attached. Thanks, Kim

What are the correct sizes (for judging) for the 2 wood screws through the exposed end of the nickel plated door latch for the 68B shown on the lower side of the picture that screw into the wood? It looks like flat, slotted, #10 or maybe #12 could work, probably 1 or 1-1/4 inch long so not to...

The new standards rev 2016 page G16 refer to mid 1930 Cabriolets are like 1929's and the door latch is nickel plated and also the plunger. These are riveted to metal connectors over to the door handle. Most all is hidden under door panel and its has special springs and would be tricky to nickel...