Search results

How do I get rid of the rust on the inside of an original windshield frame? I have been able to take the top side off exposing the openings in the sides of the frame. This gives me an opening about 3/8 inch square about 16 Inches deep for the side and the bottom about 40 inches across. Not...

Has any one used a rivnut for attaching the hinge to the rumble seat lid? I am considering doing so on my 68A.

I'm sorry, but I don't understand how this place works. the forum i think that I do get somewhat. but teh Swap meet makes little sense to me. I have seen several things that i would lim=ke to purchase. but HOW? I did ask tha qwuestion in my latest effort to purchase and got a personal...

Is the rear bumper brace for a 68a caabriolet longer than one for a standard coupe? On the one I have now the distance from the center of the hole where the brace attaches top teh rear cross member to the center of the hole where the riser attaches to the floor cross sill rear assembly is...

The judging standards say that the 7 tooth steering gear was fased out in 1929 in favor of the 2 tooth. What steering wheel was used in 1929 on the 2 tooth column? I have heard of people switching the Spark/throtle lever quadrant from a 7 tooth to a 2 tooth and using the 29 steering wheel...

I am building an early 29 cabriolet and am deciding whether to put in a 7 tooth or 2 tooth stearing gear. My question involves the upper quadrant for the throttle and spark rods. If I decide to use a 2 tooth do I need to find one with a quadrant that will work with a 29 sterring wheel? Do I...