Search results

Hello and Merry Christmas folks. Just going to start repair on a CCPU for my CAA truck. As I approached this project (and the stack of projects I am collecting as time goes on) I made the decision to get a tig welder for body work as the consensus is that a tig is better than a mig for this. I...

I’m looking for a Canadian Brantford cab for a 29-29 pickup in restorable condition within a days drive of Manitoba Canada. Must be complete but can be minus the gas tank. Pm me with price and pictures, thanks for looking Saving iron from the scrap pile one piece at a time

Hi guys , just saying hello, got a 46/47 pickup on the weekend, I've got the cylinders soaking already in atf/varsol , she's fairly complete and should be a lot of fun for the kids and I to bring back to life. I'll be reading old threads pertaining to this specific series of pickup but if you...

Hi folks, I noticed some blistering of the paint on the top side of my fender last week when I was polishing the car, this particular fender had enough body work done that I initially thought it was a body work issue. Tonight I was doing a service on her and noticed the ding from the front...

Hey guys, hope everyone is enjoying summer so far. I have a bit of a dilemma.... over the last couple years since I started restoring my A, guys have been offering me parts for model T's. So far I have an engine and transmission from a '25, a differential I pulled from a wreckers scrap pile, a...

Hi folks, finally spring like up here in the north so getting the last bug or two out of my car before hitting the road. I had an intermittent electroloc connection issue to figure out. So after tracing it to the connection between the armoured cable and the head I found the wire moves inside...

I'm looking for one or two good rebuildable horn armatures. Also looking for the early 28 Center bumper medallion that says "Ford, Made in Canada" Malcolm@pinesdune.com

Hi guys. As a mid winter make work project I decided to rebuild a couple distributors as spares. So I gathered up five distributors, one completely stripped including the bushings. I disassembled the rest, sandblasted them, then proceeded to remove the bushings as the last step. When I removed...

I have a yard of Tan drill material for covering the top bows and interior panels that came with my car, it's from the 70's and that shade is no longer available from LB, I used new Tan drill in my sporty so everything matched. If you have an older restoration that could use a panel recovered...

I'm finishing up my sport coupe top on my early 28, just checking to see if the rain gutter look correct or if they should move forward / back or up/down before I secure them. As of right now, they are centred over the nails. Also, how snug do I fit the belt rail moulding, do I hammer it right...

What do you folks recommend as a spray adhesive to glue the top bow drill material to the cardboard fillers. I tried a spray contact cement but it bled through The bow drill didn't like storage for forty ish years Sent from my iPhone using Tapatalk

I am just in the progress of putting together a list of all my stored parts that came with the truck I just brought home last fall. I have several oil pans, some early 28, some later ones. I've looked through the judging standards (old version) and seen when changes were made (omition of the...

Is there a previous thread with a few pics of windlace installation and how it all fits together? I'm probably overthinking this but does the steel track just overlay the material and card board backer or does it "bite" the material and backer? Pic one Pic two Or wrap excess material...

Looking for a ring gear and pinion for an AA Ford with a timken differential. Republic numbers are H106A on the ring and H107A on the pinion, it's a 5-34 tooth count , gear measures 11.5" outside diameter, 8" centers on the bolt holes Ford part numbers are Thanks for looking Sent from...

Hi guys, started work on the next project. I'm starting on the diff of a 29 Canadian AA with a timken rear end. A couple questions, does anyone know if there's a ring and pinion assembly available for this application? I've got two sets but one has broke teeth and the other (tho usable) is...

Well, picked up another one, I must like basket cases. Lots has been done to her, lots and lots more to do. And my God did she come with spare parts lol The rest of the sheet metal and doors I tucked away in the shed, I'll add that pic later. It looks mostly there, just some cab bits...

Looking for parts and service manuals for a Canadian AA truck, thanks Sent from my iPhone using Tapatalk

Hi guys, I'm looking at a '27 T touring, it's been in a shed for 50 years, the engine is dry seized. I'm looking to go bring her home next week and it crossed my mind I should have a plan if the transmission bands or a brake is stuck. I was thinking of taking some poly sleds to put under the...

Hi guys, I'm looking for the "black ringed- clear Center" cap that cover the gauge on a champion spark plug cleaner, please pm me if you've got one and how much you'd like for it, thanks, Malcolm Sent from my iPhone using Tapatalk

Hi, I'm looking for the black cap with clear plastic that covers the gauge on a champion spark plug cleaner, please contact me if you have one and how much you'd like , thanks Sent from my iPhone using Tapatalk