Search results

Replacing the King Pins and Bushings and I noted that the bushing fits flush in the upper casting (top and bottom). In the lower casting the bushing fits flush with the top surface but extends about 1/16" out of the bottom of the lower casting. Sound right to anyone? Thanks.

1931 Victoria. Older restoration, a driver, not a concourse car. Rare "Twin-X" 2 speed overdrive, Model "B" Diamond engine, runs good. No rust, all steel. Lots of non-reproduction parts. Not sure how to add photos...photos available upon request.

I need to dump the old carpet in my '29 Roadster. Did they come originally with rubber mats or did they come with carpet? I saw a rubber mat and there were some kind of fasteners. Not sure how they work. The old carpet has some of the old snaps left but they'd need to be replaced. Mat or...

I have one of these rear ends in my Victoria and need to know if anyone can tell me anything about how to maintain it. I try to shift it only at very low speeds as it tends to grind a bit at higher speeds and that isn't good. Been told these are not common and am considering changing to a...

I have a '31 Victoria that has, what I've been told, a Ruxtell 2-speed rearend. It functions well and is as far as I can figure about a 30% overdrive. Only difficulty is that if I am going over about 5 mph it will grind slightly when shifted up or down, so I usually shift only while...