Search results

  1. A

    1930 Repo Headlight Conduit/Sockets Fit

    I'm now installing the headlights on my 1930 project. I had no original conduit or socket parts on the car so had to get replacement parts. The problem is that the conduit connector is not locking onto the headlight socket. Out of frustration I very slightly filed down the end of the socket...
  2. A

    Generator/ammeter question

    will mal-adjustment of the third brush on the generator cause a showing of a discharge on the ammeter? When I tested across the battery terminals with the car running it shows a charge, not a discharge. Ammeter gauge is wired correctly, or at least the yellow wire goes on the left side of the...
  3. A

    '30 Tudor Front Fender Removal

    I need to remove the front fenders on my 30 Tudor to repair and paint them. I know where the general mounting bolts are at along the frame per the service and repair manual, but there appears to be more bolts like the seat mounting hardware and maybe some others that don't show in the manual...
  4. A

    End View of rain gutter installation

    I'm attempting to reinstall the steel rain gutter on my '30 Tudor. My question is, does the gutter part itself fit over the top of the mounting bracket or inside the top groove of the bracket? I've attached a poor end view sketch hoping it will help make sense to my question. Please don't...
  5. A

    1930 Headlight Inner Ring

    Has anyone found an easy/good way to connect a new headlight inner ring to the headlight housing without spot welding? Is it possible to solder them on? Maybe a better question is.... does anyone know where to get the the inner rings? Or is there another solution to the ring?
  6. A

    Headlight Housing Ring Replacement

    Has anyone replaced the inner headlight ring that is spot welded onto the headlight housing? I have a set of headlights for my '30 tudor with great rings but the housings are not good, and a set of housings with rotted rings.. I'd like to switch the rings to the good housings. I don't think...
  7. A

    Window Side Regulator '30 Tudor

    Is the grooved circular piece on the end of the regulator arm that contacts the metal glass channel supposed to be free and turn like a bearing? All of mine are frozen in place (maybe stamped that way when manufactured?). I don't know if it's supposed to be like that and slide along the metal...
Back
Top