Search results

Finally was successful at removing the perch bolts from my axle.Several requested that I tell how this process went for me.I will say that I used the good information provided by those who posted and some of my own ideas. I soaked the area around the perch bolts with penetrating oil and...

Have a bent front axle,and after stripping it down decided to remove the perch bolts and just take the wishbone off.I'd heard that this was difficult so soaked the connection in penetrating oil before attempting to press them out. This is where the whole procedure gets ugly.The press came...

Anyone used or have experience using the multiple disc clutch.I have several spares and an engine that was fitted with one though most tell me to change to the regular style of clutch.As well I have one MDC that appears heavier than the rest,I think it might be out of a larger truck,could this...

Hello, Bought the Rear main thrust collar part number A 6334 and was wondering how you get this thing to work.It did not reduce my excessive clearance so is it supposed to be built up with babbitt then re machined to provide correct end play for the crank ?Unfortunately this part did not...

Hello,Anyone know of a good outfit on the West Coast that does Model A babbitt bearing work?I'm looking for a shop that has not too long of a turn around time and that will finish to a non standard journal undersize.I have a reground crank that mikes out to 1.465 inches on the rod journals...