Search results

Happy Thanksgiving! I'm restoring the visor for my '25 Coupe and all I have is the metal frame. Is there a filler that goes between the layers of covering before you close it up? Thanks...

Would anyone know what kind of wood was used in making these boxes? Thanks a bunch....

Dose anybody know who made the 4 speed transmissions and is there a parts list available especially for the intermediate out put shaft.

Just acquired a perfect oil can. What is a common way to construct a holder for mounting in the engine compartment. Any suggestions or photos, please?

Question for the experienced. What is the ideal tire pressure for a '25 Coupe with 21x3 1/2 Split rim tires? Thanks...

On occasion, I experience a front end shimmy or wobble after a right turn only at low speed. Close the throttle and the car recovers. Any ideas where the problem cause lies? Thanks...

I believe I read a post onetime where it was suggested to add 1qt. Of ATF could be added to the crankcase oil. What does this do for the engine or transmission? I would like to learn the benefits of this trick. Thanks...

If low and high bands were a little too tight in adjustment (dragging) would that cause a severe jerking hole going from low to high speed? Thanks...:)

For those who have done it...What is a reliable and economical method of making the conversion? Thanks to all...

Are there complete kits available to make this change? Have you experienced conversion. Thanks for any information and bewares.

Need serviceable visor frame with brackets to complete my coupe's restoration. Thanks, Racemo@AOL.com

I'm sure there are several ways to locate a bad coil in a 1925 coupe. I would like to learn an experienced owners method. Any suggestions would be appreciated. Thanks a bunch...

Has anyone tried a 6 volt LED in the Model T tail light to improve brightness? Any good luck with this? Thanks...

My rebuilt transmission pedal arrangement after adjustment disappoints me. I expected the brake and clutch to have equal heights and the reverse pedal to be slightly proud of them, in other words, closer to the seat. None of my pedals are even with each other. To depress the reverse you have...

Just restored a 1925 Coupe and have the original engine splash pans. I assume the tabs attach to the engine oil pan bolts on the underside of the oil pan. The side that attaches to the frame? Do they attach to the underside of the bottom frame channel or to the top side of the lower frame...

Preparing to install new safety glass I my 1925. Felt channel is offered in two styles, beaded, and un-beaded. Does the beaded feature a bright metal edge on the lips of the channels? Thaanks...

Hello all, 1925 coupe, where the double tab hood latches clamp the hood closed, the round bead at the bottom of the side panels, the spring loaded latches appear to have worn through the bead. I'm wondering if I should weld up the worn hole? It appears that the latch gets a better clamp with...

Assuming all molding should be fitted and installed before paint? How does one crimp the outer shell to the nail strip? Any suggestions from the experienced would be greatly appreciated. Thanks a bunch...

In a restoration program, I rebuilt engine and transmission. Both are mounted in the chassis but, the engine has not been started. In an attempt to adjust trans bands discovered the assembly to be locked in high gear. Cannot get the clutch to release. Clutch fingers are backed of and the...

It's getting close to that time! I'm not familiar with paints and body finishing processes so what can an experienced T owner reccomend, please. I would be grateful for some common suggestions and why. The sheet metal has been carefully prepared and primed with " high build" and should...