Search results

I am trying to install a 53 merc motor in a 35 pu frame using Pete and Jakes 34 front end with vega cross steering. the original merc motor had a center sump pan and it interfered with the tie rod and steering arm. I have purchased a rear sump pan here on the Ford Barn but it will not clear...

I have converted my 53 merc engine to 12 volt positive ground. I have been told that Runtz gauge voltage regulators are designed for positive ground applications only. how do I reduce the voltage down to 6 volts on the gauges? I converted to 12 volts in order to use an alternator and Mallory...

I am using the original 6 volt gauges in my 35 pu. they are in perfect condition and I did not have to cut the dash. I am running a 12 volt system. I have 2 runtzs to reduce the 12 volt to 6 volt. where do you wire the runtz at the gauge? any sugestions? thanks steve

I need a set of 35 pu original gauges. also, can these gauges be adapted to 12 volt. what about the senders for fuel and oil. I cant find any of the modern gauges that I like. thanks steve

I need an oil pan with rear sump to fit a 53 merc engine. must have the correct pickup tube. thanks steve

I have a 53 merc in a 35 pu with Pete and Jakes front end. The oil pan has a center sump and the steering rod hits the pan. Is there a rear sump pan available? What else do I need to change , such as the pick up tube. Does anyone have these parts? Thanks Steve

What is the best way to hook up the aod auto trans cable using 2 strombergs. I have the adaptor from speedway. thanks

does anyone have some instructions on how to assemble a 34 bed? I just bought one from Mac-hills and they do not have any instructions. One problem is I am putting it on a 35 frame. I realize I have to shorten the frame by 7 inches. Help.Steve

Does anyone have 2 adaptors to go from a ford 9 inch drum brake to the 16 inch 5 1/2 wire wheels. the drums are 5 on 5.

I have a 36 pu radiator that came with my 35. It appears to be in good shape but cant say for sure. Local pick up only. thanks steve

does anyone have a good rear window outside sheet metal frame? I have the inside molding. do not need the glass. when I chopped mine and cut the window out, the bottom was not savable. I guess I could use a 36, 37,38 or 39. I just need to weld the outside frame to the rear or the cab...

Where can I find an adapter from a 5 inch bolt pattern 9 inch rear end to fit the original 5 1/2 inch wire wheels, or do I have to make it? Steve:)

I still have a good 36 radiator. Also a fair 35 pu bed, some rust but does have a decent tailgate. I just pulled a great set of 49-53 Mercury heads, motor was running 2 weeks ago.make offer. call me at 405-816-5033. steve

Complete hub to hub 35 pu rear end. also closed drive line. complete pedal assembly. excellent 35 pu radiator. am looking for a nice 35 pu grille. need the rear window sheet metal around the glass:)

Will the 35 and 36 pu grille interchange. I have a 36 radiator and would like to keep it. I also need a good pair of lock mechanisms for a 35 pu. I need a good elect windshield wiper motor for 35 pu. Steve

:)good repairable front pu fenders with headlights and all braces. running boards are solid with little rust. also complete 35 pu front end and rear end. 2 ea 36 pu grills need repair. complete motor, condition unknown. make offer. if interested i will email pictures. thanks

i need the top half of 35 pu door to fill in the gap left after chop. also is there any difference in radiator frame in 35 and 36?

:) need the top half of 35 pickup door to fill gap left after chop