Search results

Looking for nice to excellent grill..

I needed a new winter project,so I picked up a1963 ford falcon futura ,6 cyl,3 on the tree…. My plan is to put a v8 in ,but first I want to change to 5 lug. what’s the best route to go,without breaking the bank??

Looking for 239 that might have been pulled out of service for something more modern,meaning good running engine,prefer tri state area ….

I seem to find discrepancies (internet) on where number one cylinder is on the distributor on a 8ba,need ford book information,not the web information ! Reply if you have book information!

I was having some white smoke and exhaust pipe changed sorta different color…..anyway I got some new fel pro gaskets…..took old heads off and the passenger side water ports some were covered totally over by the old head gasket,no holes nothing,even you could see where the water was pushing...

1952 ford f1,239 v8—Engine Paint color ? what was the original engine paint color ??

Looking for a rebuilt or rebuild able box for a 1952 ford f1!!!!!

I replaced my ivr now three years in a row. I have a f1 converted to 12v,so my fuel gauge,temp gauge and oil gauge are using the same ivr ,is this wrong?? Where should I be getting my 12volt power for the regulator,maybe it's getting a spike??? Maybe it's the China junk ivr..?? Any suggestions???

I was having some steering play issues so...... I disconnected the drag link,noticed my pitman arm ball was shaped like a almond,not round...so I ordered a new Draglink since the spring was broke....the new one has 4 ball cups but my old one only used 3,I looked at an assembly (ford) had online...

So I have some electrical gremlin in my 1952 ford f1,I would turn key and hit my start switch,sometime it works and sometimes not,when it wouldn't my dome light would go off as I turn the key to on.Now it doesn't work at all and I hear a noise and my battery voltmeter jumps. I thought one of...

Looking for driver side window regulator!

Wife wants to put wreath on front of f1,anybody have any good ideas for no scratches,they have wire or plastic backs!!

Where the wipers vacuum or electric?

I noticed my exhaust pipe changed color,little more condensation,but ran fine,water gauge seemed to work. Fast forward ,noticed my radiator would form a little seepage,and a little lose of fluid,now it heats up and steams.....this is my first flathead ,I am thinking I need new head gaskets,any...

Can somebody give me the measurements,where the screws are located on dash that hold the defrost tubes??

I am putting together the bare essential tool box for under the seat,just in case. What did ford tool kit consist of ,back in the day?? (52 f1)

Looking for a good source on a radiator,went the aluminum route radiator lasted a year,I am done with that route.

I was having low pressure on my factory gauge......so I plumbed a mechanical gauge in also....initial start both gauges are the same,ten minutes if that the factory gauge drops off drastically,is it the sender or the dash gauge??? 1952 flathead f1....

Looking for a box to rebuild.......

Looking for early 289 exhaust manifolds,that exit straight back,no turns.....