Search results

Trying to help a friend restore his really nice original 49 coupe. Wondering what spare tire hold down hardware was original for that car? No info could be found in my 49 - 69 illustration manual, the wagon an t bird had illustrations , not the passenger car. Anybody have a nice original that...

Nice original factory jack for 55 Thunderbird. Works well up and down. i have otger Ford jacks from 50's and 60's. Use message system or email me at smjfritz@charter.net. Steve P.S. I can't get a picture attached to this post , sorry. If you just email me I will reply to you with pictures...

Just picked up some original Ford Bumper jacks. 1959 Ford Galaxie 1961/62 Ford Galaxie 1964 Ford Galaxie 1965=68 Ford Galaxie 1966 / 67 Ford Fairlane 1968 / 69 Ford Torino Bead blasted , cleaned , lubed , returned to original semi gloss black on head, base and hook , matte nichol on shaft. Ready...

Have several factory original bumper jacks , all in working order. Use this message system for inquiries and pictures. $ 140 and up. 1964 Ford Galaxie 1962 Ford Falcon 1970 , 71 Ford Torino 1958 , 1959 Ford Fairlane , Galaxie

My project car wipers don't "park" down in the correct location when turning the switch off. They stop ok , but do not return to the lower resting location as they should. The shop manual doesn't address this in the trouble shooting section. Anybody have some experience with this problem ...

Would the 10AR108 - 62 part number mean its 6 volt or 12 volt application. This solenoid fits on 49 to 62 Ford three speed trans , but Ford did switch to 12 volt in 19 56. Does anybody have the solenoid application list. No Ford part numbers stamped on the housing , only the manufacturers number...

What modern size battery will fit the trey of a 63 Galaxie. Can't find anybody selling the old 29NF group size that was in there originally. Thanks!

I have a complete set of side trim stainless mouldings for the 55 Ford Customline 2dr sedan and Ranch Wagon. I polished up using BALDER hi speed buffer , spending several hours doing so. The front fenders and doors are specific only for these models. The long rear quarters are also correct for...

Trying to help out a buddy with electrical problem. On a 54 Mercury , where would the electrical feed to the dash heater blower switch originate from ? On my 55 Ford , the hot wire leading to the blower switch has a fuse in line and originates on the ignition access pole. Would that be the same...

I need some help here from guys that might have experience decoding VIN and Data Plate. Here's what I have. 1963 1/2 Ford Galaxie Red , 2dr hardtop , fastback roof line. Car now has a small block , 289 with auto transmission. Engine/trans may have been swapped out years ago, current owner has no...

Has anybody found a supplier for an electric choke conversion kit for a 1968 2100 2 bbl carb ? Any info would be appreciated , thanks.

Looking for 1950 Ford Convertible door and rear quarter stainless side mouldings for the passenger side. Message me please if you have for sale.

Would the 1957 ' 1958 and 1959 Ford SKYLINER retractable roof be the same item for all three years? I have a friend that asked me that question. He has a barn find roof and was thinking about selling it. Didn't know what it was from , the car itself is long gone , but this roof was up in a hay...

Looking for a decent 63 Ford Galaxie fastback two door model , actually this model is 63 1/2 . Ford started to produce the fastback 2 door hardtop late in 63 and spring months of 64. Driver quality or older restoration , with or without drive train. Let me know what you have. text or call...

Is there a way to determine by data plate info if a vehicle is actually a 63 1/2 model vrs an earlier build 1963 model ? Did Ford have a special data plate entry for the 63 1/2 models ? Thanks , I appreciate any info on that. Steve

Looking for a 1963 Ford or 63 1/2 Ford Galaxie to restore. Project car or older restoration preferred. No junkers please , but let me know what you have , not afraid of a good project car to finish. Message me on what you have I will follow up with you. Serious buyer , not a tire kicker...

I need a 1956 Ford 2bbl stock air cleaner. The 56 is different than the 55 air cleaner. in 56 Ford used a carb with an automatic choke assym. This choke assym sticks up above the carb , so the air cleaner is designed underneath to accomodate the choke housing. So must be a known correct 56 air...

Looking for a good 1955 Ford 2bbl carb , must have ECG 5 stamped in a circle on the drivers side of fuel bowl. This would be a manual choke style carb. Let me know what you have , good core for rebuilding please. Thanks for checking, Steve Fritz use this message system or email me direct at...

Couple questions on the basic wiring diagram for a dome light install on a 1965 Ford pick up truck. First off , on the door switches , do we need to source switches that are grounded to the door post, or should they be an insulated switch ? The original door switches are long gone , so not sure...

Anybody have a 55/56 Station Wagon parts car? Looking for some misc small interior parts from the cargo and spare tire compartment area. Namely the spare tire cover lid latch and the chain and prop rod that hold that spare tire cover open. Also, any brackets or hold down parts to secure the...