Search results

ordered a interior kit from Cartouche, but having trouble with how the rear package tray goes. It is just a piece of pre cut fiberboard wrapped with cloth, so is there a piece of wood that it is supposed to sit on? i see where there are 2 previous nail holes in the metal frame but it seems to...

For those of you with a 4 door, how did you do your rear seat arm rest with a new interior? Pics if possible.

Still cannot figure out the rear arm rest. Ordered new interior. Have the metal arm rest with the hook on back. I know it needs foam on top but how does the cloth attach down below the metal of the armrest. I know the seat helps hold it in. Is a thin wooden board supposed to go there to tack it...

How does the rubber tack attach under the dash? About to attach the front wind lace under the dash. Have the dash loose to get it behind it but how exactly does the tack go..any pics would be great

What else holds this arm rest in? 1940 fordor deluxe. Have sound deadener on but is there some thin black board that goes on the sides to cover up everything else?

How do the rear arm rest attach in a 40 fordor? Upholstery shop wasnt sure. I can see one hole it seems a bolt was attached to but the front isnt lining up. Does anyone have any good interior pics of their car that shows views of troublesome areas in how headliner meets other areas? The front...

1940 Fordor and needing the rear arm rest to see what all is needed and to make a template. Any help is appreciated.

Does anybody know who still makes the foam and wood templates for the rear arm rest? We are ready to install interior but need the rear arm rest.

on our 40 Ford with the 12V conversion, we had the generator converted to 12V but my question is what is the best way to wire that up? Its a one wire with a ground added to the voltage reg screw and other end attached to mounting bolt.

40 ford deluxe is 12v. Have a new mechanical brake light switch but isnt wired in at the moment. When i turn the lights on the brake lights stay on, they actually come on soon as i hook the battery up. When i wire the switch in and change wires etc it still will not work correctly. Was...

have a 1940 ford deluxe. everything was restored but having trouble finding what part #7314 that goes in front of felt washer #7323. i also cannot find what #s 3476-s and #351341-s are. Looks like some kind of washer. can someone help point in right direction? And yes i have been all over Macs...

Who sells small items such as original felt washers and etc that go to the steering column shift linkage for the 3 on the tree.

Anyone have the switch or any other parts to the heater assembly

Brand new and never used. $125

Where does the license plate wire run into the tail light wire loom?

Ordered most of the original wiring since car is mostly kept original. It also has a 90amp alt and a heat exchanger along with a new 12v wiper motor. Should i go with a new fuse panel or what are some ideas to look at?

Have a 40 fordor deluxe and supposedly a 80hp engine but the carb on it says model 92...is this the wrong carb for the 80hp motor. Also have the original temp sensors and wondered if they would still be good or should i get 2 new ones? Thanks for any help!

If you guys did front disc brakes and used a 67 mustang mc, how and what did you do to fix the door bc the lid is to high?

Put a speedway disc brake setup with a 1967 mustang m.c. Bought the adapter to make it fit, what pushrod length should be used?

Ordered an exhaust set from Bob Drake but need a muffler that will fit and be as close to possible as original. one we ordered has been on backorder for too long a time. Any help is appreciated.